P1288 Cadillac Code - Accelerator Pedal Position Sensor 3 Circuit High Voltage
Quick Answer
The P1288 Cadillac code refers to an issue with the Accelerator Pedal Position Sensor 3 Circuit High Voltage. Common causes include Faulty Accelerator Pedal Position Sensor, Damaged wiring or connectors in the sensor circuit, Issues with the ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1288 Cadillac indicates Accelerator Pedal Position Sensor 3 Circuit High Voltage.
- Common causes
- Common causes include Faulty Accelerator Pedal Position Sensor, Damaged wiring or connectors in the sensor circuit, Issues with the ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1288 Cadillac Description
The P1288 Cadillac code refers to an issue with the Accelerator Pedal Position Sensor 3 Circuit High Voltage. This sensor is responsible for monitoring the position of the accelerator pedal and sending this information to the engine control module (ECM) to adjust the fuel and air mixture for optimal engine performance. When the sensor detects a high voltage signal that is outside of the normal operating range, it triggers the P1288 code.
Common Causes of P1288 Cadillac
- Faulty Accelerator Pedal Position Sensor
- Damaged wiring or connectors in the sensor circuit
- Issues with the ECM
- Corrosion or water damage in the sensor
- Poor electrical connection or grounding issues
Symptoms of P1288 Cadillac
- Loss of power or sluggish acceleration
- Engine stalling or surging
- Reduced fuel efficiency
- Illumination of the check engine light
- Rough idling or difficulty starting the vehicle
How to Fix P1288 Cadillac
- Begin by diagnosing the root cause of the issue using a diagnostic scanner to retrieve the fault codes and pinpoint the problem.
- Inspect the Accelerator Pedal Position Sensor and its wiring for any signs of damage or wear. Replace the sensor if necessary.
- Check the ECM for any faults or malfunctions, and reprogram or replace it if needed.
- Clear the fault codes from the ECM and perform a test drive to ensure that the issue has been resolved.
- If the problem persists, consult with a professional mechanic for further troubleshooting and repairs.
Cost to Fix P1288 Cadillac
The cost of repairing a P1288 Cadillac code can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, you can expect to pay anywhere from $150 to $500 for parts and labor. Keep in mind that diagnostic time and labor rates can vary, so it's advisable to check with local auto repair shops for a more accurate estimate based on your vehicle make and model.
Need more information about the P1288 Cadillac code?
Need more information on how to fix the P1288 Cadillac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1288 Cadillac code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1288 Cadillac Code
What does the OBDII code P1288 mean for a Cadillac?
P1288 indicates a high voltage issue in the circuit for Accelerator Pedal Position Sensor 3, which monitors the position of the accelerator pedal.
What are the common symptoms of code P1288 on a Cadillac?
Symptoms can include reduced engine performance, poor throttle response, the vehicle entering "limp mode," and the illumination of the check engine light.
What causes the P1288 code to appear?
Common causes include wiring issues, a faulty Accelerator Pedal Position Sensor 3, damaged connectors, or a malfunctioning throttle body.
Can I still drive my Cadillac with a P1288 code?
While the vehicle may still be drivable, performance may be severely reduced, and driving with this code for an extended period can lead to further damage.
How do I diagnose the P1288 code?
Inspect the wiring and connectors for damage, test the Accelerator Pedal Position Sensor 3 for proper voltage readings, and check for other related codes.
How can I fix the P1288 code on a Cadillac?
Repairs might include replacing the Accelerator Pedal Position Sensor 3, repairing damaged wiring or connectors, or updating the engine control module software.
What tools are needed to troubleshoot the P1288 code?
You’ll need an OBDII scanner, a multimeter for testing voltage and continuity, and potentially wiring repair tools.
How much does it cost to repair a P1288 code on a Cadillac?
Repair costs vary but can range from $100 to $300 for parts and labor, depending on whether a sensor or wiring needs replacement.
Does the P1288 code affect fuel efficiency?
Yes, the code can reduce fuel efficiency due to poor throttle control and engine performance.
Can a dirty throttle body trigger code P1288?
It’s less common, but a dirty throttle body could indirectly contribute to sensor-related issues or throttle performance problems.
Discuss the causes and fixes for P1288 Cadillac OBDII Code
Code P1288 Cadillac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.