P1286 HONDA - Engine Oil Pressure Sensor Stuck Low

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What does this mean?

P1286 HONDA Possible Causes

  • Low engine oil level
  • Faulty Engine Oil Pressure (EOP) Sensor
  • Engine Oil Pressure Sensor harness is open or shorted
  • Engine Oil Pressure Sensor circuit poor electrical connection

How do I fix code P1286 HONDA

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1286 HONDA code

    Labor: 1.0

    The cost of diagnosing the P1286 HONDA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

P1286 HONDA Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1286 HONDA Meaning

Two rocker arm oil control solenoids open and close according to the commands from the Powertrain Control Module (PCM), and oil pressure is applied to and then drawn from the Valve Pause System (VPS) to change valve timing and the operation of the valve.
The PCM monitors the oil pressure of the switching mechanism using an Engine Oil Pressure (EOP) sensor and a rocker arm oil pressure switch downstream of the rocker arm oil control solenoid. The PCM compares the oil pressure based on the PCM command and the oil pressure condition of the EOP sensor and the rocker arm oil pressure switch to determine if the system is operating normally.
OBDII Code P1286 HONDA - Engine Oil Pressure Sensor Stuck Low - Engine-Codes.com

P1286 HONDA More Information

Need more information on how to fix the P1286 HONDA code?
Get Access to Factory Service Manuals

Related Information