P1280 ISUZU - Accelerator Pedal Position Sensor 2 Circuit

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What does this mean?

P1280 ISUZU Possible Causes

  • Faulty Accelerator Pedal Position (APP)
  • Accelerator Pedal Position harness is open or shorted
  • Accelerator Pedal Position circuit poor electrical connection

How do I fix code P1280 ISUZU

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1280 ISUZU code

    Labor: 1.0

    The cost of diagnosing the P1280 ISUZU code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

P1280 ISUZU Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1280 ISUZU Meaning

The Accelerator Pedal Position (APP) sensors are located within the Throttle Actuator Control (TAC) module assembly. The TAC module assembly is mounted to the accelerator pedal bracket. There are 3 individual APP sensors within the TAC module. Three separate signal circuits, low reference circuits, and 5-volt reference circuits are used in order to determine the accelerator pedal position. The APP sensor signal voltages increase when the accelerator pedal is depressed.
OBDII Code P1280 ISUZU - Accelerator Pedal Position Sensor 2 Circuit - Engine-Codes.com

P1280 ISUZU More Information

Need more information on how to fix the P1280 ISUZU code?
Get Access to Factory Service Manuals

Related Information