P1279 HONDA - VTEC System Malfunction Front Bank 2
P1279 HONDA Possible Causes
- Low engine oil pressure or level
- Open or short circuit condition
- Faulty VTEC oil pressure switch
- Faulty VTEC solenoid
How is the P1279 HONDA code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the P1279 HONDA code
Labor: 1.0The cost to diagnose the P1279 HONDA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P1279 HONDA MeaningThe VTEC system activates the VTEC solenoid valve by command from the powertrain control module (PCM), and it charges/discharges the hydraulic circuit of the VTEC mechanism that is installed in the valve system to switch valve timing between Low and High. The PCM monitors oil pressure conditions in the hydraulic circuit of the VTEC mechanism according to the VTEC oil pressure switch downstream of the VTEC solenoid valve. If there is a disparity between oil pressure condition in the hydraulic circuit that is determined by the PCM command, and the oil pressure condition that is determined by the status of the VTEC oil pressure switch, the system is considered faulty and a DTC is stored.
More InformationNeed more information on how to fix the P1279 HONDA code?
Get Access to Factory Service Manuals