P1275 Buick Code - Accelerator Pedal Position Sensor 1 Circuit
Quick Answer
The P1275 Buick code indicates a problem with the Accelerator Pedal Position Sensor 1 Circuit in the vehicle. Common causes include Faulty accelerator pedal position sensor, Wiring issues, such as a short or open circuit, Corrosion or damage to electrical connectors. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P1275 Buick indicates Accelerator Pedal Position Sensor 1 Circuit.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Wiring issues, such as a short or open circuit, Corrosion or damage to electrical connectors.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1275 Buick Description
The P1275 Buick code indicates a problem with the Accelerator Pedal Position Sensor 1 Circuit in the vehicle. The accelerator pedal position sensor is a vital component that communicates the position of the accelerator pedal to the engine control module (ECM). This information is crucial for the ECM to adjust the air-fuel mixture and ignition timing to ensure optimal engine performance.
Common Causes of P1275 Buick
- Faulty accelerator pedal position sensor
- Wiring issues, such as a short or open circuit
- Corrosion or damage to electrical connectors
- ECM malfunction or software issues
- Environmental factors, such as moisture intrusion
Symptoms of P1275 Buick
- Hesitation or lack of response when pressing the accelerator pedal
- Rough idling or irregular engine performance
- Reduced power or acceleration
- Engine stalling or difficulty starting
- Illumination of the check engine light
How to Fix P1275 Buick
- Diagnose the issue using a scan tool to retrieve the fault code and perform a visual inspection of the accelerator pedal position sensor and related wiring.
- Test the accelerator pedal position sensor using a multimeter to check for proper voltage and resistance values.
- Inspect the wiring harness for any signs of damage, corrosion, or loose connections and repair or replace as necessary.
- Clear the fault code from the ECM memory and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, consider replacing the accelerator pedal position sensor or seeking further diagnosis from a qualified mechanic.
Cost to Fix P1275 Buick
The cost of repairing the Accelerator Pedal Position Sensor 1 Circuit can vary depending on the specific cause of the issue and the cost of parts and labor in your area. On average, the replacement of the accelerator pedal position sensor can range from $100 to $300, while labor costs can add another $80 to $150 per hour. Additional costs may apply if wiring repairs or ECM replacement is necessary. It is recommended to get a detailed estimate from a trusted auto repair shop to determine the exact cost for your vehicle.
When is the Code Detected?
Need more information about the P1275 Buick code?
Need more information on how to fix the P1275 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1275 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1275 Buick Code
No Frequently Asked Questions about P1275 Buick Code found.
Discuss the causes and fixes for P1275 Buick OBDII Code
Code P1275 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.