Engine-CodesAcura – P1272 Acura

P1272 Acura Code - Accelerator Pedal Position Sensor 2-3 Correlation

Quick Answer

The P1272 Acura diagnostic trouble code (DTC) indicates a problem with the correlation between the Accelerator Pedal Position Sensor 2 and 3. Common causes include Faulty accelerator pedal position sensor 2 or 3, Wiring or connector issues leading to poor signal transmission, ECM software or hardware malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1272 Acura indicates Accelerator Pedal Position Sensor 2-3 Correlation.
Common causes
Common causes include Faulty accelerator pedal position sensor 2 or 3, Wiring or connector issues leading to poor signal transmission, ECM software or hardware malfunction.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1272 Acura Description

The P1272 Acura diagnostic trouble code (DTC) indicates a problem with the correlation between the Accelerator Pedal Position Sensor 2 and 3. The accelerator pedal position sensors are responsible for sending signals to the engine control module (ECM) to determine the position of the accelerator pedal. In modern vehicles, these sensors are typically electronic, with no physical connection between the pedal and the throttle body. When there is a discrepancy between the signals from sensors 2 and 3, the ECM may have difficulty accurately controlling the throttle position, leading to potential performance issues.

OBDII Code P1272 Acura - Accelerator Pedal Position Sensor 2-3 Correlation
P1272 Acura Code - Accelerator Pedal Position Sensor 2-3 Correlation

Common Causes of P1272 Acura

  1. Faulty accelerator pedal position sensor 2 or 3.
  2. Wiring or connector issues leading to poor signal transmission.
  3. ECM software or hardware malfunction.
  4. Mechanical issue with the throttle body or related components.
  5. Environmental factors such as moisture or corrosion affecting sensor operation.

Symptoms of P1272 Acura

  1. Poor acceleration or lack of response when pressing the accelerator pedal.
  2. Rough idling or stalling when coming to a stop.
  3. Check Engine Light illuminated on the dashboard.
  4. Reduced engine power or performance.

How to Fix P1272 Acura

  1. Begin by diagnosing the specific cause of the correlation issue by using a scan tool to read and interpret live data from the accelerator pedal position sensors.
  2. Inspect the wiring harness and connectors for any signs of damage or corrosion. Repair or replace any damaged components as necessary.
  3. Test the accelerator pedal position sensors using a multimeter to ensure they are functioning within the manufacturer's specified range.
  4. If the sensors are found to be faulty, replace them with OEM or high-quality aftermarket replacements.
  5. Clear the DTC from the ECM's memory and perform a test drive to verify that the issue has been resolved.

Cost to Fix P1272 Acura

The cost of repairing the Accelerator Pedal Position Sensor 2-3 Correlation issue can vary depending on the specific cause of the problem and the labor rates in your area. On average, the parts for this repair can range from $50 to $200, while the labor cost may be between $100 and $300. Keep in mind that these estimates are general figures, and the actual cost could be higher or lower based on your vehicle's make and model, as well as the location of the repair shop. It's recommended to get a detailed quote from a trusted mechanic or dealership to determine the precise cost for your situation.

When is the Code Detected?

The Engine Control Module (ECM) compared the signal from both Accelerator Pedal Position (APP) sensors and detected a voltage difference.

Need more information about the P1272 Acura code?

Need more information on how to fix the P1272 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1272 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1272 Acura Code

No Frequently Asked Questions about P1272 Acura Code found.

Discuss the causes and fixes for P1272 Acura OBDII Code

Code P1272 Acura comments

No comments found for this page.