P124A 2014 GMC Sierra Code - Injector 3 Positive Voltage Control Circuit Shorted to Control Circuit
Quick Answer
The diagnostic trouble code P124A for a 2014 GMC Sierra indicates a problem with the Injector 3 Positive Voltage Control Circuit being shorted to the Control Circuit. Common causes include Damaged or frayed wiring harness, Faulty fuel injector, Issues with the engine control module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P124A 2014 GMC Sierra indicates Injector 3 Positive Voltage Control Circuit Shorted to Control Circuit.
- Common causes
- Common causes include Damaged or frayed wiring harness, Faulty fuel injector, Issues with the engine control module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P124A 2014 GMC Sierra Description
The diagnostic trouble code P124A for a 2014 GMC Sierra indicates a problem with the Injector 3 Positive Voltage Control Circuit being shorted to the Control Circuit. In simpler terms, this means that there is an issue with the electrical circuit that controls the fuel injector for cylinder 3 in the engine. The fuel injector is responsible for delivering the precise amount of fuel into the combustion chamber for proper engine operation.
Common Causes of P124A 2014 GMC Sierra
- Damaged or frayed wiring harness
- Faulty fuel injector
- Issues with the engine control module (ECM)
- Poor connection in the circuit
- Electrical short in the system
Symptoms of P124A 2014 GMC Sierra
- Engine misfires or runs rough
- Lack of power or acceleration
- Difficulty starting the engine
- Poor fuel economy
- Illumination of the Check Engine Light
How to Fix P124A 2014 GMC Sierra
- Begin by conducting a thorough visual inspection of the wiring harness and connectors associated with Injector 3.
- Use a multimeter to test the continuity and resistance of the wiring to identify any shorts or open circuits.
- Inspect the fuel injector for proper operation and replace it if necessary.
- Check the engine control module (ECM) for any fault codes and ensure it is functioning correctly.
- Clear the diagnostic trouble codes and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P124A 2014 GMC Sierra
The typical repair costs for resolving a P124A code can vary depending on the specific cause of the issue. In general, replacing a fuel injector can cost between $150 to $300, while addressing wiring harness issues may range from $100 to $200. The total repair cost, including parts and labor, could amount to $300 to $600. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's recommended to obtain a detailed estimate from a qualified technician.
Need more information about the P124A 2014 GMC Sierra code?
Need more information on how to fix the P124A 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P124A 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P124A 2014 GMC Sierra Code
1. What does the OBDII code P124A mean for a 2014 GMC Sierra?
P124A indicates that the Injector 3 Positive Voltage Control Circuit is shorted to the control circuit, which affects the fuel injection system.
2. What are the common symptoms of code P124A in a 2014 GMC Sierra?
Common symptoms include rough idling, poor acceleration, misfires, decreased fuel efficiency, and the Check Engine Light being illuminated.
3. What causes the P124A code to appear on a 2014 GMC Sierra?
This code is typically caused by damaged wiring, a short circuit, a faulty injector, or issues with the engine control module (ECM).
4. Can I drive my 2014 GMC Sierra with the P124A code?
Driving with this code is not recommended as it can lead to further damage to the engine or fuel system and cause performance issues.
5. How do I diagnose the P124A code on a 2014 GMC Sierra?
Diagnose by using a scan tool to confirm the code, inspecting the wiring and connectors for damage, and testing the injector and ECM for proper function.
6. How can wiring issues cause the P124A code?
Damaged or corroded wiring can create a short circuit between the positive voltage and control circuits of Injector 3, triggering the code.
7. What tools are needed to fix the P124A code on a 2014 GMC Sierra?
You may need a diagnostic scan tool, a multimeter, and basic automotive tools to inspect the wiring, connectors, and fuel injector.
8. How much does it cost to repair the P124A code on a 2014 GMC Sierra?
Repair costs can vary depending on the issue, but replacing an injector typically costs $200–$400, while wiring repairs may cost less if no major components are damaged.
9. Could a faulty ECM cause the P124A code on a 2014 GMC Sierra?
Yes, a malfunctioning ECM can fail to control the injector circuits properly, though this is less common than wiring or injector issues.
10. How can I prevent the P124A code from reoccurring?
Regular maintenance, keeping wiring and connectors in good condition, and addressing injector issues promptly can help prevent this code from reoccurring.
Discuss the causes and fixes for P124A 2014 GMC Sierra OBDII Code
Code P124A 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.