P1248 Acura Code - Accelerator Pedal Position Sensor 1 and 2 Incorrect correlation
Quick Answer
The P1248 Acura code indicates a problem with the correlation between the Accelerator Pedal Position Sensor 1 and 2. Common causes include Faulty accelerator pedal position sensors, Wiring issues or loose connections, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1248 Acura indicates Accelerator Pedal Position Sensor 1 and 2 Incorrect correlation.
- Common causes
- Common causes include Faulty accelerator pedal position sensors, Wiring issues or loose connections, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1248 Acura Description
The P1248 Acura code indicates a problem with the correlation between the Accelerator Pedal Position Sensor 1 and 2. In modern vehicles, the accelerator pedal position sensor is a vital component that communicates the position of the accelerator pedal to the Engine Control Module (ECM). The ECM uses this information to determine the appropriate fuel injection and ignition timing for optimal engine performance. When the correlation between the two sensors is incorrect, it can lead to issues with engine performance, fuel efficiency, and overall drivability.
Common Causes of P1248 Acura
- Faulty accelerator pedal position sensors
- Wiring issues or loose connections
- ECM malfunction
- Software glitches in the ECM
- Environmental factors such as moisture or corrosion
Symptoms of P1248 Acura
- Hesitation or surging during acceleration
- Reduced power output
- Engine stalling
- Check Engine Light illuminated
- Limp mode activated
How to Fix P1248 Acura
- Begin by connecting a diagnostic scan tool to retrieve the fault codes and confirm the issue.
- Inspect the accelerator pedal position sensors and wiring for any visible damage or loose connections.
- Test the sensors using a multimeter to ensure they are functioning correctly.
- If the sensors are faulty, replace them with OEM or high-quality aftermarket parts.
- Clear the fault codes and perform a test drive to verify that the issue has been resolved.
Cost to Fix P1248 Acura
The cost of repairing the Accelerator Pedal Position Sensor 1 and 2 Incorrect correlation issue can vary depending on the specific cause of the problem and the labor rates in your area. On average, the parts for this repair can range from $100 to $300, while the labor cost can be between $100 and $300. Overall, you can expect to pay between $200 and $600 for this repair. It's important to consult with a qualified mechanic or repair shop for an accurate estimate based on your vehicle's make and model.
Need more information about the P1248 Acura code?
Need more information on how to fix the P1248 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1248 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1248 Acura Code
1. What does the OBDII code P1248 mean on an Acura?
P1248 indicates that the Engine Control Module (ECM) has detected an incorrect correlation between Accelerator Pedal Position Sensor 1 and Sensor 2.
2. What are the symptoms of the P1248 code on an Acura?
Symptoms may include reduced engine performance, a lack of throttle response, the vehicle entering "limp mode," and the illumination of the check engine light.
3. What causes the P1248 code to trigger?
The P1248 code can be caused by a faulty accelerator pedal position sensor, damaged wiring, poor electrical connections, or a malfunctioning ECM.
4. How does the accelerator pedal position sensor work?
The accelerator pedal position sensor monitors the position of the accelerator pedal and sends signals to the ECM to control throttle response.
5. Can I drive my Acura with the P1248 code?
While the car may still be drivable, it may operate in limp mode with limited power, which can be unsafe. It's best to address the issue promptly.
6. How is the P1248 code diagnosed?
A technician will use a scan tool to read the code, inspect the wiring and connectors, test the accelerator pedal position sensors, and verify proper sensor signals.
7. Can I fix the P1248 code myself?
If you're experienced with car repairs, you can inspect the pedal sensor, wiring, and connectors. However, advanced diagnostics may require professional tools and expertise.
8. How much does it cost to repair the P1248 code?
Repair costs vary but typically range from $100 to $400, depending on whether the issue is a sensor replacement, wiring repair, or ECM-related.
9. What happens if I ignore the P1248 code?
Ignoring the code can lead to worsening drivability issues, reduced fuel efficiency, and potential damage to other engine components.
10. Does the P1248 code mean the accelerator pedal sensor needs replacement?
Not necessarily. The issue could also be caused by wiring problems or a faulty ECM, so a proper diagnosis is essential.
Discuss the causes and fixes for P1248 Acura OBDII Code
Code P1248 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.