P1246 Jaguar Code - No Cranking Signal High Signal
Quick Answer
The P1246 code for Jaguar vehicles indicates a problem with the cranking signal being too high. Common causes include Faulty wiring or connections in the cranking signal circuit, Malfunctioning engine control module (ECM), Defective starter motor or solenoid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1246 Jaguar indicates No Cranking Signal High Signal.
- Common causes
- Common causes include Faulty wiring or connections in the cranking signal circuit, Malfunctioning engine control module (ECM), Defective starter motor or solenoid.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1246 Jaguar Description
The P1246 code for Jaguar vehicles indicates a problem with the cranking signal being too high. When you try to start your vehicle, the engine control module (ECM) sends a signal to the starter motor to crank the engine. However, if the ECM detects that the cranking signal is too high, it means that there is an issue with the signal's voltage or resistance, which can prevent the engine from starting properly.
Common Causes of P1246 Jaguar
- Faulty wiring or connections in the cranking signal circuit.
- Malfunctioning engine control module (ECM).
- Defective starter motor or solenoid.
- Issues with the battery or charging system.
- Corrosion or damage to electrical components.
Symptoms of P1246 Jaguar
- Engine cranks but does not start.
- Intermittent starting issues.
- Check engine light is illuminated.
- Reduced engine performance.
- Vehicle may stall or have difficulty accelerating.
How to Fix P1246 Jaguar
- Perform a thorough inspection of the cranking signal circuit, checking for loose connections, damaged wiring, or corrosion. Repair or replace any faulty components.
- Test the engine control module (ECM) for proper functionality and replace if necessary.
- Check the starter motor and solenoid for any defects and replace if needed.
- Inspect the battery and charging system to ensure they are operating correctly. Replace the battery or alternator if required.
- Clear the diagnostic trouble codes from the ECM and test the vehicle to ensure the issue has been resolved.
Cost to Fix P1246 Jaguar
The cost of repairing a P1246 code in a Jaguar can vary depending on the specific cause of the issue and the parts and labor required for the repair. On average, the repair costs for this issue can range from $200 to $500, including parts and labor. However, it's essential to note that diagnostic time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your location and vehicle model.
Need more information about the P1246 Jaguar code?
Need more information on how to fix the P1246 Jaguar code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1246 Jaguar code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1246 Jaguar Code
1. What does the OBDII code P1246 mean on a Jaguar?
P1246 on a Jaguar indicates a "No Cranking Signal High Signal," meaning the engine's control module is not receiving a proper cranking signal when attempting to start the engine.
2. What are the common symptoms of the P1246 code on a Jaguar?
Symptoms may include the engine not starting, no cranking sound when turning the key, and a possible check engine light or warning indicator on the dashboard.
3. What causes the P1246 code to be triggered?
Common causes include a faulty crankshaft position sensor, damaged or corroded wiring/connectors, a failing starter motor, or issues with the engine control module (ECM).
4. Can a weak battery cause the P1246 code to appear?
Yes, a weak or failing battery can lead to insufficient voltage, which may result in a high cranking signal being sent to the ECM.
5. How can I diagnose the P1246 code on my Jaguar?
Start by checking the crankshaft position sensor and its wiring for damage or corrosion. Test the battery voltage and inspect the starter motor and related connections.
6. Is it safe to drive with the P1246 code active on my Jaguar?
No, the P1246 code typically prevents the engine from starting, so the vehicle will not be drivable until the issue is resolved.
7. How do I fix the P1246 code on a Jaguar?
Repairs may include replacing a faulty crankshaft position sensor, cleaning or repairing corroded wiring, ensuring the battery and starter are in good condition, or reprogramming the ECM if necessary.
8. How much does it cost to repair the P1246 code on a Jaguar?
The cost depends on the root cause. Replacing a crankshaft position sensor can range from $150 to $300, while other repairs like wiring fixes or ECM programming may vary.
9. Can a faulty starter motor trigger the P1246 code on a Jaguar?
Yes, a failing starter motor can cause irregular cranking signals, leading to the P1246 code being set.
10. Do I need special tools to fix the P1246 code on my Jaguar?
Basic tools like a multimeter for testing voltage and an OBDII scanner to clear the code may be sufficient. Advanced diagnostics might require specialized tools or professional assistance.
Discuss the causes and fixes for P1246 Jaguar OBDII Code
Code P1246 Jaguar comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.