P1245 Subaru Code - Wastegate Control Solenoid Valve Malfunction Fail-Safe
Quick Answer
The P1245 Subaru code indicates a malfunction in the wastegate control solenoid valve, which is a crucial component of the turbocharger system in the vehicle. Common causes include Electrical faults in the wastegate control solenoid valve, Vacuum leaks in the wastegate system, Clogged or dirty wastegate components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1245 Subaru indicates Wastegate Control Solenoid Valve Malfunction Fail-Safe.
- Common causes
- Common causes include Electrical faults in the wastegate control solenoid valve, Vacuum leaks in the wastegate system, Clogged or dirty wastegate components.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1245 Subaru Description
The P1245 Subaru code indicates a malfunction in the wastegate control solenoid valve, which is a crucial component of the turbocharger system in the vehicle. The wastegate control solenoid valve is responsible for controlling the amount of boost pressure that the turbocharger generates, ensuring optimal performance and fuel efficiency. When this valve malfunctions, it can lead to a variety of issues that affect the vehicle's performance and drivability.
Common Causes of P1245 Subaru
- Electrical faults in the wastegate control solenoid valve
- Vacuum leaks in the wastegate system
- Clogged or dirty wastegate components
- Faulty wastegate actuator
- Wiring issues or connections
Symptoms of P1245 Subaru
- Decreased engine power and acceleration
- Turbo lag or delayed response
- Engine stalling or rough idling
- Check Engine Light illuminated
- Decreased fuel efficiency
How to Fix P1245 Subaru
- Diagnose the specific cause of the wastegate control solenoid valve malfunction using a diagnostic scanner and multimeter.
- Inspect the solenoid valve, wiring, and vacuum lines for any signs of damage or wear.
- Clean or replace any clogged or dirty components in the wastegate system.
- Test the wastegate actuator and adjust or replace if necessary.
- Clear the diagnostic trouble codes and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P1245 Subaru
The typical repair costs for a wastegate control solenoid valve malfunction can range from $200 to $500, including parts and labor. However, it's important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops commonly charge between $80 and $150 per hour, but rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It's advisable to check local rates for a more precise estimate.
Need more information about the P1245 Subaru code?
Need more information on how to fix the P1245 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1245 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1245 Subaru Code
1. What does the OBDII code P1245 mean on a Subaru?
P1245 indicates a malfunction in the wastegate control solenoid valve, which is responsible for regulating turbocharger boost pressure.
2. What are the common symptoms of code P1245 in a Subaru?
Symptoms may include reduced engine performance, poor acceleration, a check engine light, and possibly entering a "limp mode" or fail-safe condition.
3. What causes the P1245 code to appear?
Common causes include a faulty wastegate control solenoid valve, damaged wiring or connectors, a vacuum leak, or issues with the turbocharger system.
4. Can I drive my Subaru with a P1245 code?
It’s possible to drive with this code, but reduced performance and potential engine damage from improper boost control make it important to address the issue promptly.
5. How do I diagnose the P1245 code on a Subaru?
Start by inspecting the wastegate control solenoid valve and its wiring for damage. Use a multimeter to test the solenoid for proper operation and check for vacuum leaks.
6. How is the P1245 code fixed?
Repairs may include replacing the wastegate control solenoid valve, fixing damaged wires or connectors, repairing vacuum lines, or addressing turbocharger issues.
7. Can a dirty or clogged wastegate cause the P1245 code?
Yes, a clogged or stuck wastegate can prevent proper boost control, triggering the P1245 code. Cleaning or repairing the wastegate may resolve the issue.
8. How much does it cost to fix the P1245 code on a Subaru?
Repair costs can range from $100 to $500, depending on whether the issue is with the solenoid valve, wiring, or turbocharger. Labor and diagnostic fees may increase the cost.
9. Will clearing the P1245 code fix the problem?
Clearing the code will turn off the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.
10. Can a failing turbocharger cause the P1245 code?
Yes, a failing or malfunctioning turbocharger can indirectly cause the P1245 code if it impacts wastegate operation or boost pressure regulation.
Discuss the causes and fixes for P1245 Subaru OBDII Code
Code P1245 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.