P1245 2012 Ford Fusion Code - Alternator Load Input Failed Low
Quick Answer
The P1245 diagnostic trouble code (DTC) for a 2012 Ford Fusion indicates that the alternator load input has failed low. Common causes include Faulty alternator, Damaged alternator wiring harness, Defective alternator load input sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1245 2012 Ford Fusion indicates Alternator Load Input Failed Low.
- Common causes
- Common causes include Faulty alternator, Damaged alternator wiring harness, Defective alternator load input sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1245 2012 Ford Fusion Description
The P1245 diagnostic trouble code (DTC) for a 2012 Ford Fusion indicates that the alternator load input has failed low. This means that the power output from the alternator is lower than expected, which can lead to various electrical issues in the vehicle. The alternator is responsible for charging the battery and providing power to the electrical systems while the engine is running. When the alternator load input fails low, it can result in a lack of sufficient power supply to the vehicle's electrical components, causing various performance issues.
Common Causes of P1245 2012 Ford Fusion
- Faulty alternator
- Damaged alternator wiring harness
- Defective alternator load input sensor
- Problem with the vehicle's electrical system
Symptoms of P1245 2012 Ford Fusion
- Dimming headlights or interior lights
- Dead battery
- Difficulty starting the vehicle
- Flickering dashboard lights
- Issues with radio or other electrical components
How to Fix P1245 2012 Ford Fusion
- Begin by checking the alternator and its connections for any visible damage or wear.
- Test the alternator output using a multimeter to ensure it is within the manufacturer's specifications.
- Inspect the alternator wiring harness for any signs of damage or corrosion and repair or replace as needed.
- Check the alternator load input sensor for proper operation and replace if faulty.
- Reset the diagnostic trouble codes and test the vehicle to ensure the issue has been resolved.
Cost to Fix P1245 2012 Ford Fusion
The cost of repairing a P1245 code on a 2012 Ford Fusion can vary depending on the specific cause of the issue. In general, the cost of replacing a faulty alternator can range from $300 to $800, including parts and labor. Additional costs may apply if there are other components that need to be repaired or replaced. It is recommended to consult with a professional mechanic to get an accurate estimate based on your vehicle's specific needs. Keep in mind that labor rates at auto repair shops can vary, so it's advisable to check local rates for a more precise estimate.
Need more information about the P1245 2012 Ford Fusion code?
Need more information on how to fix the P1245 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1245 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1245 2012 Ford Fusion Code
1. What does the OBDII code P1245 mean on a 2012 Ford Fusion?
P1245 indicates that the Engine Control Module (ECM) has detected a low input signal from the alternator load input circuit, which monitors alternator performance.
2. What are the common symptoms of code P1245 in a 2012 Ford Fusion?
Symptoms may include dim or flickering headlights, a weak or dead battery, electrical system malfunctions, and the check engine light being illuminated.
3. What causes the P1245 code in a 2012 Ford Fusion?
Common causes include a faulty alternator, damaged wiring or connectors in the alternator circuit, a defective battery, or a malfunctioning ECM.
4. Can a bad alternator trigger the P1245 code?
Yes, a failing alternator that cannot maintain proper voltage or load can trigger the P1245 code.
5. How is the P1245 code diagnosed in a 2012 Ford Fusion?
Diagnosis involves checking the alternator output, inspecting wiring and connectors for damage, testing the battery, and using a multimeter to verify the alternator load input signal.
6. Is it safe to drive with the P1245 code in a 2012 Ford Fusion?
Driving with this code is not advised, as it could lead to a drained battery, loss of electrical power, or potential stalling.
7. How do you fix the P1245 code on a 2012 Ford Fusion?
Repairs may include replacing the alternator, repairing damaged wiring or connectors in the circuit, replacing the battery, or reprogramming the ECM if necessary.
8. Can a weak battery cause the P1245 code?
Yes, a weak or failing battery can cause improper alternator load readings, leading to the P1245 code.
9. How much does it cost to fix the P1245 code?
Repair costs vary depending on the issue but typically range from $200 to $700, including parts and labor, if the alternator or wiring needs replacement.
10. Can the P1245 code clear itself after repairs?
The code may clear itself after the issue is resolved, but it’s recommended to use an OBDII scanner to confirm and manually reset the code.
Discuss the causes and fixes for P1245 2012 Ford Fusion OBDII Code
Code P1245 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.