P1244 Subaru Code - Wastegate Control Solenoid Valve Malfunction Low Input
Quick Answer
The P1244 code for Subaru vehicles specifically refers to a malfunction in the wastegate control solenoid valve with a low input signal. Common causes include Faulty wastegate control solenoid valve, Wiring issues or electrical faults in the solenoid valve system, Malfunctioning engine control module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1244 Subaru indicates Wastegate Control Solenoid Valve Malfunction Low Input.
- Common causes
- Common causes include Faulty wastegate control solenoid valve, Wiring issues or electrical faults in the solenoid valve system, Malfunctioning engine control module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1244 Subaru Description
The P1244 code for Subaru vehicles specifically refers to a malfunction in the wastegate control solenoid valve with a low input signal. The wastegate control solenoid valve is a crucial component of the turbocharger system in a vehicle. It is responsible for regulating the amount of boost pressure produced by the turbocharger, ensuring optimal engine performance and efficiency.
Common Causes of P1244 Subaru
- Faulty wastegate control solenoid valve
- Wiring issues or electrical faults in the solenoid valve system
- Malfunctioning engine control module (ECM)
- Clogged or stuck wastegate
- Vacuum leaks in the turbocharger system
Symptoms of P1244 Subaru
- Decreased engine power and acceleration
- Reduced fuel efficiency
- Hesitation or surging while driving
- Check Engine Light illuminated on the dashboard
How to Fix P1244 Subaru
- Begin by conducting a thorough diagnostic scan to confirm the P1244 code and pinpoint the exact cause of the issue.
- Inspect the wastegate control solenoid valve and surrounding wiring for any visible damage or signs of wear.
- Test the solenoid valve for proper operation using a multimeter to check for continuity and resistance.
- Replace the wastegate control solenoid valve if it is found to be faulty, ensuring proper installation and wiring connections.
- Clear the diagnostic code and test drive the vehicle to verify that the issue has been resolved and the symptoms have been eliminated.
Cost to Fix P1244 Subaru
The typical repair costs for resolving a P1244 code on a Subaru vehicle can vary depending on the specific cause of the issue and the cost of parts and labor. On average, the repair for this code can range from $200 to $500, including the cost of a new wastegate control solenoid valve and any additional components that may need to be replaced. It is important to note that diagnostic time and labor rates at auto repair shops can vary, so it is recommended to obtain a personalized estimate from a trusted mechanic or dealership based on your specific vehicle and location.
Need more information about the P1244 Subaru code?
Need more information on how to fix the P1244 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1244 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1244 Subaru Code
What does the OBDII code P1244 mean on a Subaru?
1. P1244 indicates a "Wastegate Control Solenoid Valve Malfunction Low Input," meaning the ECU has detected an issue with the wastegate control solenoid, typically involving low voltage or improper operation. 2.
What are the common symptoms of code P1244 in a Subaru?
Symptoms may include reduced engine performance, poor turbocharger response, lower boost levels, a check engine light, and potential limp mode activation. 3.
What causes the P1244 code to be triggered?
The most common causes include a faulty wastegate control solenoid, damaged or corroded wiring, a poor electrical connection, or a malfunctioning ECU. 4.
Can a clogged vacuum line cause the P1244 code?
Yes, a clogged or leaking vacuum line can disrupt the wastegate control solenoid's operation and trigger the P1244 code. 5.
How do I diagnose the P1244 code on my Subaru?
Start by inspecting the wastegate control solenoid, wiring, and connections. Use a multimeter to test for proper voltage and continuity, and check for vacuum leaks. 6.
Is it safe to drive with the P1244 code on a Subaru?
Driving with the P1244 code is not recommended, as it may result in reduced turbo performance or cause additional damage to the engine or turbocharger. 7.
How do I fix the P1244 code on a Subaru?
Repairs may include replacing the wastegate control solenoid, repairing damaged wiring, cleaning or replacing vacuum lines, or updating the ECU software if needed. 8.
Can a faulty turbocharger cause the P1244 code?
While less common, a malfunctioning turbocharger or wastegate mechanism can contribute to the P1244 code if it disrupts the solenoid's operation. 9.
What tools are needed to troubleshoot the P1244 code?
Tools may include an OBDII scanner, a multimeter, vacuum gauge, and basic hand tools for inspecting and replacing components. 10.
How much does it cost to repair the P1244 code on a Subaru?
The repair cost depends on the issue. Replacing the wastegate solenoid typically costs $100-$300, while wiring or vacuum line repairs may cost less. Labor charges vary by location.
Discuss the causes and fixes for P1244 Subaru OBDII Code
Code P1244 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.