Engine-Codes
 
OBDII Code List
 
P1228 INFINITI

P1228 INFINITI - Accelerator Pedal Position Sensor 2 Circuit High Input

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What does this mean?

P1228 INFINITI Possible Causes

  • Faulty Accelerator Pedal Position (APP) sensor
  • Accelerator Pedal Position (APP) sensor harness is open or shorted
  • Accelerator Pedal Position (APP) sensor circuit poor electrical connection

How do I fix code P1228 INFINITI

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1228 INFINITI code

    Labor: 1.0

    The cost of diagnosing the P1228 INFINITI code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the P1228 INFINITI code detected?

An excessively high voltage from the Accelerator Pedal Position (APP) sensor 2 is sent to Engine Control Module (ECM).

P1228 INFINITI Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1228 INFINITI Meaning

The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM).
Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM.
In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals.
Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation such as fuel cut.
OBDII Code P1228 INFINITI - Accelerator Pedal Position Sensor 2 Circuit High Input - Engine-Codes.com

P1228 INFINITI More Information

Need more information on how to fix the P1228 INFINITI code?
Get Access to Factory Service Manuals

Related Information