Engine-Codes.com
Engine-Codes – Nissan – P1227 Nissan

P1227 Nissan Code - Accelerator Pedal Position Sensor 2 Circuit Low Input

Quick Answer

The P1227 Nissan code indicates a problem with the Accelerator Pedal Position Sensor 2 circuit, specifically a low input signal. Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1227 Nissan indicates Accelerator Pedal Position Sensor 2 Circuit Low Input.
Common causes
Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning ECM.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 09, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1227 Nissan Description

The P1227 Nissan code indicates a problem with the Accelerator Pedal Position Sensor 2 circuit, specifically a low input signal. The accelerator pedal position sensor is a vital component in the vehicle's electronic throttle control system, which plays a crucial role in the engine's performance. This sensor is responsible for sending the correct signal to the engine control module (ECM) to adjust the throttle position based on the driver's input.

OBDII Code P1227 Nissan - Accelerator Pedal Position Sensor 2 Circuit Low Input
P1227 Nissan Code - Accelerator Pedal Position Sensor 2 Circuit Low Input

Common Causes of P1227 Nissan

  1. Faulty accelerator pedal position sensor
  2. Damaged wiring or connectors in the sensor circuit
  3. Malfunctioning ECM
  4. Corrosion or moisture in the sensor circuit
  5. Electrical issues in the throttle control system

Symptoms of P1227 Nissan

  1. Lack of power or acceleration
  2. Hesitation or stalling when trying to accelerate
  3. Rough idling
  4. Inability to start the engine

How to Fix P1227 Nissan

  1. Perform a thorough diagnostic scan to confirm the P1227 code and identify the specific cause of the low input signal.
  2. Inspect the accelerator pedal position sensor and its wiring for any visible damage or corrosion. Replace the sensor if necessary.
  3. Check the wiring and connectors in the sensor circuit for loose connections or breaks. Repair or replace any damaged components.
  4. Clear the fault codes from the ECM and reset the system to see if the issue is resolved. Test drive the vehicle to ensure that the accelerator pedal position sensor is functioning correctly.
  5. If the problem persists, further diagnosis may be required to determine if there are any underlying issues with the throttle control system or ECM that need to be addressed.

Cost to Fix P1227 Nissan

The typical repair costs for addressing a P1227 Nissan code can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, replacing a faulty accelerator pedal position sensor can cost between $100 and $200, while addressing wiring or connector issues may add additional labor costs. Overall, the total repair cost for this issue could range from $200 to $500, including parts and labor. It's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's recommended to check with local shops for a more accurate estimate.

When is the Code Detected?

An excessively low voltage from the Accelerator Pedal Position (APP) sensor 2 is sent to Engine Control Module (ECM).

Need more information about the P1227 Nissan code?

Need more information on how to fix the P1227 Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1227 Nissan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1227 Nissan Code

1. What are the common symptoms of OBDII code P1227 in a Nissan related to the Accelerator Pedal Position Sensor 2 Circuit Low Input?

- Common symptoms include reduced engine power, hesitation or stalling during acceleration, and the vehicle going into "limp mode" to protect the engine.

2. What are the possible causes of OBDII code P1227 in a Nissan?

- The code P1227 typically indicates issues with the accelerator pedal position sensor 2 circuit, which can be caused by a faulty sensor, damaged wiring, or a poor electrical connection.

3. How can I diagnose the cause of OBDII code P1227 in my Nissan?

- Diagnosing the code involves checking the wiring and connections related to the accelerator pedal position sensor 2, testing the sensor's functionality, and using a diagnostic scanner to retrieve and interpret the error codes.

4. Can a DIY enthusiast repair OBDII code P1227 in a Nissan?

- While some DIY enthusiasts may be able to address the issue by replacing the accelerator pedal position sensor 2 or repairing damaged wiring, it is recommended to consult a professional mechanic for an accurate diagnosis and repair.

5. What are the potential risks of ignoring OBDII code P1227 in a Nissan?

- Ignoring the code can lead to poor engine performance, reduced fuel efficiency, and potential safety hazards if the vehicle experiences sudden power loss or acceleration issues while driving.

6. How much does it typically cost to repair OBDII code P1227 in a Nissan?

- The cost of repairing the code P1227 can vary depending on the underlying cause, but it may range from $100 to $300 for parts and labor if the sensor needs replacement or the wiring requires repairs.

7. Are there any preventive measures to avoid OBDII code P1227 in a Nissan?

- Regularly inspecting the accelerator pedal position sensor 2 and its wiring, maintaining proper electrical connections, and addressing any performance issues promptly can help prevent the occurrence of code P1227.

8. Can a faulty Accelerator Pedal Position Sensor 2 affect other systems in the vehicle?

- Yes, a faulty sensor can impact the engine's fuel delivery, transmission shifting, and overall drivability, potentially causing issues with other systems in the vehicle.

9. Is it safe to drive with OBDII code P1227 present in a Nissan?

- It is not recommended to drive with the code present, as it can lead to unpredictable engine behavior and compromise vehicle safety. It is advisable to address the issue promptly.

10. How long does it take to repair OBDII code P1227 in a Nissan?

- The repair time for the code P1227 can vary depending on the exact cause and the availability of parts, but it typically takes a few hours to a full day for a mechanic to diagnose and fix the issue.

Discuss the causes and fixes for P1227 Nissan OBDII Code

Submit a New Comment

Code P1227 Nissan comments

No comments found for this page.