Engine-Codes
 
OBDII Code List
 
P1226 2012 NISSAN ROGUE

P1226 2012 NISSAN ROGUE - Closed Throttle Position Learning Performance Problem

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What does this mean?

Possible causes

  • Faulty Electric throttle control actuator (TP sensor 2)
  • Electric throttle control actuator (TP sensor 2) harness is open or shorted
  • Electric throttle control actuator (TP sensor 2) circuit poor electrical connection
  • Tech notes

    Start by cleaning the throttle and adjust engine idle and erase engine code. If the code comes back you may have to replace the Electric Throttle Control Actuator (Motor) to repair the problem.

    Nissan Rogue Idle Air Volume Relearn

    When is the code detected?

    Closed throttle position learning is not performed successfully, repeatedly.

    Possible symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • P1226 2012 Nissan Rogue Description

    Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor, etc. The Throttle Position (TP) sensor responds to the throttle valve movement.

    The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.

    OBDII Code P1226 2012 Nissan Rogue - Closed Throttle Position Learning Performance Problem - Engine-Codes.com

    Related Information