P1226 2010 Nissan Altima Sedan Code - Closed Throttle Position Learning Performance Problem
Quick Answer
The P1226 diagnostic trouble code (DTC) in a 2010 Nissan Altima Sedan indicates a closed throttle position learning performance problem. Common causes include Faulty throttle position sensor, Dirty throttle body, Vacuum leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1226 2010 Nissan Altima Sedan indicates Closed Throttle Position Learning Performance Problem.
- Common causes
- Common causes include Faulty throttle position sensor, Dirty throttle body, Vacuum leaks.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1226 2010 Nissan Altima Sedan Description
The P1226 diagnostic trouble code (DTC) in a 2010 Nissan Altima Sedan indicates a closed throttle position learning performance problem. This code is typically triggered when the Engine Control Module (ECM) detects that the closed throttle position learning is out of specification. The closed throttle position learning process is crucial for the vehicle's performance as it helps the ECM determine the correct throttle valve position when the throttle is fully closed.
Common Causes of P1226 2010 Nissan Altima Sedan
- Faulty throttle position sensor
- Dirty throttle body
- Vacuum leaks
- Wiring issues
- ECM software malfunction
Symptoms of P1226 2010 Nissan Altima Sedan
- Rough idle
- Hesitation or lack of response when accelerating
- Stalling
- Decreased fuel efficiency
How to Fix P1226 2010 Nissan Altima Sedan
- Perform a throttle body cleaning to remove any carbon buildup that may be affecting the throttle position sensor's readings.
- Inspect and test the throttle position sensor to ensure it is functioning correctly. Replace if necessary.
- Check for any vacuum leaks in the intake system and repair as needed.
- Inspect the wiring harness for any damage or corrosion. Repair or replace any damaged wires.
- If the issue persists, reprogram the ECM to reset the closed throttle position learning.
Cost to Fix P1226 2010 Nissan Altima Sedan
The cost of repairing a P1226 code in a 2010 Nissan Altima Sedan can vary depending on the specific cause of the issue. On average, the cost of parts for this repair may range from $50 to $200, while labor costs can range from $100 to $300. It's important to note that these are rough estimates, and actual costs may vary based on the location, labor rates, and any additional diagnostic or repair work required. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate cost estimate.
When is the Code Detected?
Need more information about the P1226 2010 Nissan Altima Sedan code?
Need more information on how to fix the P1226 2010 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1226 2010 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1226 2010 Nissan Altima Sedan Code
1. What does OBDII code P1226 mean on a 2010 Nissan Altima Sedan?
P1226 indicates a "Closed Throttle Position Learning Performance Problem," meaning the engine control module (ECM) is having trouble learning or recognizing the throttle position when the throttle is fully closed.
2. What are the common symptoms of code P1226 in a 2010 Nissan Altima?
Common symptoms include rough idling, poor acceleration, reduced fuel efficiency, hesitation during throttle response, and illumination of the check engine light.
3. What causes the P1226 code to appear in a 2010 Nissan Altima?
Possible causes include a dirty or faulty throttle body, a malfunctioning throttle position sensor (TPS), damaged wiring or connectors, or a software issue in the ECM.
4. How can I fix the P1226 code on my 2010 Nissan Altima?
Cleaning the throttle body, checking and repairing wiring or connectors, replacing a faulty TPS, or performing a throttle position relearn procedure may resolve the issue.
5. What is a throttle position relearn procedure for a P1226 code?
It is a process where the ECM is reset to relearn the fully closed and fully open positions of the throttle, usually done with a scan tool or following a specific sequence outlined in the vehicle’s manual.
6. Can a dirty throttle body trigger the P1226 code?
Yes, a dirty throttle body can prevent the throttle plate from fully closing or cause incorrect readings, leading to the P1226 code.
7. Is it safe to drive with the P1226 code on a 2010 Nissan Altima?
It may be safe to drive short distances, but the vehicle's performance and fuel efficiency may be affected. Prolonged driving could cause further damage, so it’s best to address the issue promptly.
8. How much does it cost to fix the P1226 code on a 2010 Nissan Altima?
Repair costs depend on the cause but can range from $50-$150 for a throttle body cleaning to $200-$600 if parts like the throttle body or TPS need to be replaced.
9. Can I clear the P1226 code without fixing the problem?
Clearing the code without addressing the underlying issue will only result in it reappearing. Proper diagnosis and repair are necessary to resolve the problem.
10. Can a faulty ECM cause the P1226 code in a 2010 Nissan Altima?
While rare, a faulty ECM can cause the P1226 code if it fails to properly perform the throttle position learning process or interpret sensor data accurately.
Discuss the causes and fixes for P1226 2010 Nissan Altima Sedan OBDII Code
Code P1226 2010 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.