Engine-Codes - Isuzu - P1220 ISUZU

P1220 ISUZU - Throttle Position Sensor 2 Circuit

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What is this?
Table of contents

P1220 ISUZU Possible Causes

  • Faulty Throttle Position (TP) Sensor
  • Throttle Position (TP) Sensor harness is open or shorted
  • Throttle Position (TP) Sensor circuit poor electrical connection

How do I fix code P1220 ISUZU?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1220 ISUZU code

Labor: 1.0

The cost of diagnosing the P1220 ISUZU code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1220 ISUZU Meaning

The Throttle Position (TP) Sensor is mounted on the throttle body of the Throttle Actuator Control (TAC) assembly. The sensor is actually 2 individual throttle position sensors within 1 housing. Two separate signal circuits, a low reference circuit, and a 5-volt reference circuit are used in order to connect the TP sensor assembly and the TAC module. The TP sensor signal voltage increases as the throttle opens. The signal circuit for TP sensor is pulled up to 5-volt reference voltage.

P1220 ISUZU More Information

Need more information on how to fix the P1220 ISUZU code?
Get Access to Factory Service Manuals

Need more help?

Get the P1220 Isuzu code diagnosed by a professional: Find a repair shop in your area