P1219 GMC Code - Throttle Position Sensor Reference Voltage
Quick Answer
The P1219 diagnostic trouble code for GMC vehicles refers to an issue with the Throttle Position Sensor (TPS) Reference Voltage. Common causes include Faulty TPS: The TPS itself may be malfunctioning, providing incorrect voltage readings to the ECU, Wiring issues: Corrosion, fraying, or damage to the wiring harness connecting the TPS to the ECU can disrupt the reference voltage signal, ECU malfunction: A problem with the engine control unit can also result in incorrect TPS reference voltage readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1219 GMC indicates Throttle Position Sensor Reference Voltage.
- Common causes
- Common causes include Faulty TPS: The TPS itself may be malfunctioning, providing incorrect voltage readings to the ECU, Wiring issues: Corrosion, fraying, or damage to the wiring harness connecting the TPS to the ECU can disrupt the reference voltage signal, ECU malfunction: A problem with the engine control unit can also result in incorrect TPS reference voltage readings.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1219 GMC Description
The P1219 diagnostic trouble code for GMC vehicles refers to an issue with the Throttle Position Sensor (TPS) Reference Voltage. The TPS is a crucial component of the vehicle's electronic throttle control system, responsible for monitoring the position of the throttle pedal and sending voltage signals to the engine control unit (ECU) to adjust the engine's performance accordingly. The reference voltage is the voltage supplied to the TPS to ensure accurate readings and proper functionality.
Common Causes of P1219 GMC
- Faulty TPS: The TPS itself may be malfunctioning, providing incorrect voltage readings to the ECU.
- Wiring issues: Corrosion, fraying, or damage to the wiring harness connecting the TPS to the ECU can disrupt the reference voltage signal.
- ECU malfunction: A problem with the engine control unit can also result in incorrect TPS reference voltage readings.
- Poor electrical connections: Loose or poor electrical connections at the TPS or ECU can cause voltage drop or fluctuations.
Symptoms of P1219 GMC
- Rough idling or stalling: A faulty TPS reference voltage can cause fluctuations in engine speed at idle or even lead to stalling.
- Acceleration issues: Inaccurate TPS readings can result in delayed or uneven acceleration response from the engine.
- Poor fuel efficiency: Incorrect TPS signals can cause the engine to run rich or lean, leading to decreased fuel economy.
- Check Engine Light: The illumination of the Check Engine Light on the dashboard is a common symptom of this code.
How to Fix P1219 GMC
- Diagnose the issue: Use a diagnostic scanner to retrieve the trouble code and perform a thorough inspection of the TPS, wiring, and electrical connections.
- Replace the TPS: If the TPS is found to be faulty, it will need to be replaced with a new unit.
- Repair wiring: Address any wiring issues by repairing or replacing damaged wires or connectors.
- Check ECU: Test the engine control unit to ensure it is functioning correctly and replace if necessary.
- Clear codes: After completing the repairs, clear the fault code from the ECU's memory to reset the system and see if the issue has been resolved.
Cost to Fix P1219 GMC
The cost of repairing a P1219 TPS Reference Voltage issue can vary depending on the extent of the problem and the specific components that need to be replaced. On average, the cost of replacing a throttle position sensor ranges from $100 to $250, including parts and labor. Additional costs may apply if wiring repairs or ECU replacement are necessary. It's important to note that labor rates at auto repair shops can vary, so it's advisable to obtain quotes from multiple sources to get an accurate estimate for your specific vehicle.
Need more information about the P1219 GMC code?
Need more information on how to fix the P1219 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1219 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1219 GMC Code
No Frequently Asked Questions about P1219 GMC Code found.
Discuss the causes and fixes for P1219 GMC OBDII Code
Code P1219 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.