Engine-Codes - Cadillac - P1218 CADILLAC

P1218 CADILLAC - Injection Pump Calibration Circuit

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What is this?
Table of contents

P1218 CADILLAC Possible Causes

  • Powertrain Control Module (PCM) currently does not have a resistor value
  • Powertrain Control Module (PCM) is unable to read resistor value

How do I fix code P1218 CADILLAC?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Tech Notes

The P1218 code usually sets when the resistor is missing out of the PMD or the system has been disturbed and the ECU is re-learning the resistor value. Most of the times the problem is the missing resistor. Cycling the key many times will relearn the resistor value.

Cost of diagnosing the P1218 CADILLAC code

Labor: 1.0

The cost of diagnosing the P1218 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1218 CADILLAC Meaning

The Powertrain Control Module (PCM) uses a calibrated resistor internally in the Injection Pump to determine fuel rates. the resistor value is stored in the PCM memory. If the PCM memory has been disturbed or replaced the PCM will relearn the resistor value on the next ignition cycle. The code is set when the key ON or engine running and PCM does not detects a correct current valid resistor value, or it determined that it was unable to read the current resistor value.

P1218 CADILLAC More Information

Need more information on how to fix the P1218 CADILLAC code?
Get Access to Factory Service Manuals

Need more help?

Get the P1218 Cadillac code diagnosed by a professional: Find a repair shop in your area