P1212 2013 NISSAN ROGUE - ABS/TCS Communication Line
P1212 2013 NISSAN ROGUE Possible Causes
- Dead (Weak) battery
- Faulty ABS actuator and electric unit (control unit)
- ABS actuator and electric unit harness is open or shorted
- ABS actuator and electric unit circuit poor electrical connection
How do I fix code P1212 2013 NISSAN ROGUE
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
P1212 2013 NISSAN ROGUE Tech NotesStart by checking the battery charge and terminal connection. Weak or dead battery could cause poor Control Area Network (CAN) communication.
Cost of diagnosing the P1212 2013 NISSAN ROGUE code
Labor: 1.0The cost of diagnosing the P1212 2013 NISSAN ROGUE code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
When is the P1212 2013 NISSAN ROGUE code detected?- ECM can not receive the information from ABS/TCS control unit continuously.
P1212 2013 NISSAN ROGUE Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1212 2013 NISSAN ROGUE MeaningThis Control Area Network (CAN) communication line is used to control the smooth engine operation during the Anti-Lock Brake System (ABS) or Traction Control System (TCS) operation. Pulse signals are exchanged between Engine Control Module (ECM) and ABS actuator and electric unit (control unit).
P1212 2013 NISSAN ROGUE More InformationNeed more information on how to fix the P1212 2013 NISSAN ROGUE code?
Get Access to Factory Service Manuals