P1212 2008 NISSAN MAXIMA - ABS/TCS Communication Line
P1212 2008 NISSAN MAXIMA Possible Causes
- Dead (Weak) battery
- Faulty ABS actuator and electric unit (control unit)
- ABS actuator and electric unit harness is open or shorted
- ABS actuator and electric unit circuit poor electrical connection
First diagnose P1212 2008 NISSAN MAXIMA code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
P1212 2008 NISSAN MAXIMA Tech NotesStart by checking the battery charge and terminal connection. Weak or dead battery could cause poor Control Area Network (CAN) communication.
Cost of diagnosing the P1212 2008 NISSAN MAXIMA code
Labor: 1.0The cost of diagnosing the P1212 2008 NISSAN MAXIMA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
When is the P1212 2008 NISSAN MAXIMA code detected?- ECM can not receive the information from ABS/TCS control unit continuously.
P1212 2008 NISSAN MAXIMA Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1212 2008 NISSAN MAXIMA MeaningThis Control Area Network (CAN) communication line is used to control the smooth engine operation during the Anti-Lock Brake System (ABS) or Traction Control System (TCS) operation. Pulse signals are exchanged between Engine Control Module (ECM) and ABS actuator and electric unit (control unit).
P1212 2008 NISSAN MAXIMA More InformationNeed more information on how to fix the P1212 2008 NISSAN MAXIMA code?
Get Access to Factory Service Manuals