P11FF 2014 Chevrolet Silverado Code - Fuel Pump Command Signal Message Counter Incorrect
Quick Answer
The P11FF diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates that the Fuel Pump Command Signal Message Counter is Incorrect. Common causes include Faulty wiring or connectors between the fuel pump control module and the engine control module, Malfunctioning fuel pump control module, Issues with the engine control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P11FF 2014 Chevrolet Silverado indicates Fuel Pump Command Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty wiring or connectors between the fuel pump control module and the engine control module, Malfunctioning fuel pump control module, Issues with the engine control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P11FF 2014 Chevrolet Silverado Description
The P11FF diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates that the Fuel Pump Command Signal Message Counter is Incorrect. This code is typically related to a communication error between the fuel pump control module and the engine control module. The fuel pump command signal message counter is used to monitor the number of messages sent between these modules, and when the counter is incorrect, it suggests a problem with the communication system.
Common Causes of P11FF 2014 Chevrolet Silverado
- Faulty wiring or connectors between the fuel pump control module and the engine control module
- Malfunctioning fuel pump control module
- Issues with the engine control module
- Corrosion or damage to the communication lines
- Software glitches or programming errors
Symptoms of P11FF 2014 Chevrolet Silverado
- Engine misfires or hesitation during acceleration
- Reduced fuel efficiency
- Engine stalling or difficulty starting
- Illuminated check engine light
- Rough idling or uneven engine performance
How to Fix P11FF 2014 Chevrolet Silverado
- Begin by conducting a thorough inspection of the wiring and connectors between the fuel pump control module and the engine control module. Repair or replace any damaged components.
- Use a diagnostic scan tool to check for any stored trouble codes and perform a communication system test to pinpoint the source of the issue.
- If necessary, replace the fuel pump control module or engine control module based on the diagnostic findings.
- Clear the DTC and perform a test drive to ensure that the issue has been resolved.
- If the problem persists, consult a professional mechanic for further diagnosis and repair.
Cost to Fix P11FF 2014 Chevrolet Silverado
The typical repair costs for addressing a P11FF code on a 2014 Chevrolet Silverado can vary depending on the specific cause of the issue. In general, replacing faulty wiring or connectors may cost between $100 and $300, while replacing the fuel pump control module or engine control module can range from $300 to $800 or more. Labor costs can add an additional $80 to $150 per hour, depending on the shop's rates and location. It's advisable to consult with a trusted mechanic to get a more accurate estimate based on your vehicle's specific needs.
Need more information about the P11FF 2014 Chevrolet Silverado code?
Need more information on how to fix the P11FF 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P11FF 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P11FF 2014 Chevrolet Silverado Code
1. What does the OBDII code P11FF mean on a 2014 Chevrolet Silverado?
The P11FF code indicates that the fuel pump command signal message counter is incorrect, which may disrupt communication between the fuel pump control module and the engine control module.
2. What are the common symptoms of P11FF on a 2014 Chevrolet Silverado?
Symptoms may include difficulty starting the engine, reduced fuel efficiency, poor engine performance, or the check engine light illuminating.
3. What causes the P11FF code to appear?
The code can be caused by issues such as faulty wiring, poor electrical connections, a malfunctioning fuel pump control module, or a failure in the engine control module.
4. Can a bad fuel pump trigger the P11FF code?
A bad fuel pump itself typically won’t trigger this code; it is more likely caused by communication or signal issues between the fuel pump control module and the ECM.
5. How can I diagnose the P11FF code on my Silverado?
Start by inspecting the wiring and connections to the fuel pump control module, checking for corrosion or damage. Use a diagnostic scanner to monitor live data and verify signal integrity.
6. Is it safe to drive with the P11FF code active?
Driving with this code active could lead to fuel delivery issues, posing risks to engine performance and reliability. It’s best to address the issue promptly.
7. How do I fix the P11FF code on a 2014 Chevrolet Silverado?
Repairs may include cleaning or replacing corroded connectors, repairing damaged wiring, reprogramming the fuel pump control module, or replacing the module if necessary.
8. Does the P11FF code require fuel pump replacement?
Not always. This code is typically related to communication errors rather than a mechanical failure of the fuel pump itself.
9. Can software issues cause the P11FF code?
Yes, outdated or corrupted software in the fuel pump control module or ECM can cause communication errors, leading to this code.
10. How much does it cost to fix the P11FF code on a Silverado?
Repair costs can vary, but diagnosing and fixing wiring or connection issues may cost around $100-$300, while module replacement or reprogramming could cost $500-$800 or more.
Discuss the causes and fixes for P11FF 2014 Chevrolet Silverado OBDII Code
Code P11FF 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.