P11FE 2018 Chevrolet Silverado Code - O2 Low Reference Circuit High Voltage (NOx Sensor 2)
Quick Answer
The P11FE diagnostic trouble code (DTC) on a 2018 Chevrolet Silverado indicates a problem with the O2 low reference circuit high voltage for NOx Sensor 2. Common causes include Faulty NOx Sensor: The most common cause of this code is a faulty NOx sensor that is sending incorrect voltage signals to the ECM, Wiring Issues: Problems with the wiring connecting the NOx sensor to the ECM can also trigger this code, ECM Malfunction: A malfunctioning ECM can misinterpret the signals from the NOx sensor, leading to the high voltage reading. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P11FE 2018 Chevrolet Silverado indicates O2 Low Reference Circuit High Voltage (NOx Sensor 2).
- Common causes
- Common causes include Faulty NOx Sensor: The most common cause of this code is a faulty NOx sensor that is sending incorrect voltage signals to the ECM, Wiring Issues: Problems with the wiring connecting the NOx sensor to the ECM can also trigger this code, ECM Malfunction: A malfunctioning ECM can misinterpret the signals from the NOx sensor, leading to the high voltage reading.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P11FE 2018 Chevrolet Silverado Description
The P11FE diagnostic trouble code (DTC) on a 2018 Chevrolet Silverado indicates a problem with the O2 low reference circuit high voltage for NOx Sensor 2. This code is related to the vehicle's emissions control system, specifically the NOx (nitrogen oxide) sensor. The NOx sensor is responsible for monitoring the levels of nitrogen oxide in the exhaust gases and providing feedback to the engine control module (ECM) to adjust fuel mixture and emissions output.
Common Causes of P11FE 2018 Chevrolet Silverado
- Faulty NOx Sensor: The most common cause of this code is a faulty NOx sensor that is sending incorrect voltage signals to the ECM.
- Wiring Issues: Problems with the wiring connecting the NOx sensor to the ECM can also trigger this code.
- ECM Malfunction: A malfunctioning ECM can misinterpret the signals from the NOx sensor, leading to the high voltage reading.
- Exhaust System Leaks: Leaks in the exhaust system can cause false readings from the NOx sensor, triggering the code.
Symptoms of P11FE 2018 Chevrolet Silverado
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Reduced Fuel Efficiency: A malfunctioning NOx sensor can lead to poor fuel efficiency as the engine may not be operating at optimal levels.
- Rough Idling: The engine may experience rough idling or hesitation when the NOx sensor is not functioning properly.
- Failed Emissions Test: If the NOx sensor is not working correctly, the vehicle may fail an emissions test due to increased nitrogen oxide emissions.
How to Fix P11FE 2018 Chevrolet Silverado
- Diagnose the Issue: Use a diagnostic scanner to retrieve the trouble code and perform further testing to pinpoint the exact cause of the high voltage reading.
- Inspect Wiring: Check the wiring harness connecting the NOx sensor to the ECM for any damage or loose connections. Repair or replace as needed.
- Test NOx Sensor: Test the NOx sensor using a multimeter to ensure it is functioning properly. Replace the sensor if it is faulty.
- Check Exhaust System: Inspect the exhaust system for leaks or damage that could be affecting the NOx sensor readings. Repair any issues found.
- Clear Codes: After completing the repairs, clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P11FE 2018 Chevrolet Silverado
The cost of repairing a P11FE code on a 2018 Chevrolet Silverado can vary depending on the specific cause of the issue. On average, the cost of replacing a NOx sensor can range from $200 to $500, including parts and labor. Additional costs may be incurred if wiring repairs or ECM replacement are necessary. It's recommended to consult with a qualified mechanic to get an accurate estimate based on the specific circumstances of your vehicle. Labor rates at auto repair shops typically range from $80 to $150 per hour, but can vary based on location and shop rates.
Need more information about the P11FE 2018 Chevrolet Silverado code?
Need more information on how to fix the P11FE 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P11FE 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P11FE 2018 Chevrolet Silverado Code
1. What does OBDII code P11FE mean on a 2018 Chevrolet Silverado?
Code P11FE indicates "O2 Low Reference Circuit High Voltage" for NOx Sensor 2, which means the low reference circuit for the oxygen sensor is experiencing a higher voltage than expected.
2. What are the symptoms of code P11FE in a 2018 Chevrolet Silverado?
Common symptoms include the check engine light turning on, reduced fuel efficiency, decreased engine performance, and potentially entering limp mode.
3. What causes code P11FE in a 2018 Chevrolet Silverado?
Potential causes include a faulty NOx sensor 2, wiring issues such as damaged or corroded connections, or a malfunctioning engine control module (ECM).
4. How can I diagnose code P11FE on my 2018 Chevrolet Silverado?
Start by visually inspecting the wiring and connectors for NOx Sensor 2. Use a multimeter to check for proper voltage and continuity. If no issues are found, test or replace the sensor.
5. Can I drive my 2018 Chevrolet Silverado with a P11FE code?
Driving with this code is not recommended, as it may lead to reduced performance, higher emissions, and potential damage to the exhaust system.
6. How much does it cost to fix code P11FE on a 2018 Chevrolet Silverado?
Repair costs vary, but replacing the NOx sensor typically costs $200–$400 for parts and labor. Wiring repairs or ECM replacement may cost more.
7. Is the NOx Sensor 2 the same as an oxygen sensor?
No, NOx sensors measure nitrogen oxide levels in the exhaust, whereas oxygen sensors measure oxygen levels. Both contribute to emissions control.
8. How do I reset the check engine light after fixing code P11FE?
Use an OBDII scanner to clear the code after repairs. If the issue is resolved, the light should not return.
9. Can a dirty exhaust system cause code P11FE?
While unlikely, excessive soot or contamination in the exhaust system can interfere with sensor readings and should be inspected if other causes are ruled out.
10. Do I need to update the ECM software to fix code P11FE?
In some cases, ECM reprogramming or software updates may be necessary if the issue is related to a software glitch. Check with a dealership for updates.
Discuss the causes and fixes for P11FE 2018 Chevrolet Silverado OBDII Code
Code P11FE 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.