P11FE 2015 Chevrolet Silverado Code - O2 Low Reference Circuit High Voltage (NOx Sensor 2)
Quick Answer
The P11FE diagnostic trouble code (DTC) for a 2015 Chevrolet Silverado refers to the O2 Low Reference Circuit High Voltage related to NOx Sensor 2. Common causes include Faulty NOx Sensor 2: The NOx sensor 2 itself may be malfunctioning, leading to incorrect voltage readings in the low reference circuit, Wiring or Connector Damage: Damage to the wiring or connectors in the low reference circuit can disrupt the flow of voltage and trigger the P11FE code, ECM Malfunction: Issues with the engine control module (ECM) can also cause the O2 Low Reference Circuit High Voltage code to be triggered. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P11FE 2015 Chevrolet Silverado indicates O2 Low Reference Circuit High Voltage (NOx Sensor 2).
- Common causes
- Common causes include Faulty NOx Sensor 2: The NOx sensor 2 itself may be malfunctioning, leading to incorrect voltage readings in the low reference circuit, Wiring or Connector Damage: Damage to the wiring or connectors in the low reference circuit can disrupt the flow of voltage and trigger the P11FE code, ECM Malfunction: Issues with the engine control module (ECM) can also cause the O2 Low Reference Circuit High Voltage code to be triggered.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P11FE 2015 Chevrolet Silverado Description
The P11FE diagnostic trouble code (DTC) for a 2015 Chevrolet Silverado refers to the O2 Low Reference Circuit High Voltage related to NOx Sensor 2. This code indicates that there is an issue with the oxygen sensor's low reference circuit, specifically in relation to the NOx (nitrogen oxide) sensor 2. The NOx sensor is responsible for monitoring and detecting the levels of nitrogen oxides in the exhaust gases, which is crucial for emissions control and overall engine performance.
Common Causes of P11FE 2015 Chevrolet Silverado
- Faulty NOx Sensor 2: The NOx sensor 2 itself may be malfunctioning, leading to incorrect voltage readings in the low reference circuit.
- Wiring or Connector Damage: Damage to the wiring or connectors in the low reference circuit can disrupt the flow of voltage and trigger the P11FE code.
- ECM Malfunction: Issues with the engine control module (ECM) can also cause the O2 Low Reference Circuit High Voltage code to be triggered.
- Exhaust System Leaks: Leaks in the exhaust system can affect the readings of the NOx sensor, potentially leading to this code.
Symptoms of P11FE 2015 Chevrolet Silverado
- Check Engine Light: The most common symptom associated with the P11FE code is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Fuel Efficiency: A malfunctioning NOx sensor 2 can lead to decreased fuel efficiency as the engine may not be running optimally.
- Emission Control Issues: Higher emissions levels may be detected during emissions testing due to inaccurate readings from the NOx sensor.
- Rough Idle: The engine may experience rough idling or hesitation when the O2 Low Reference Circuit High Voltage code is present.
How to Fix P11FE 2015 Chevrolet Silverado
- Diagnose the Issue: Use a diagnostic scanner to retrieve the specific DTC and pinpoint the exact cause of the O2 Low Reference Circuit High Voltage code.
- Inspect Wiring and Connectors: Check the wiring and connectors in the low reference circuit for any signs of damage or corrosion. Repair or replace as needed.
- Test NOx Sensor 2: Test the NOx sensor 2 to determine if it is functioning correctly. Replace the sensor if it is found to be faulty.
- Clear DTC and Test Drive: Clear the DTC from the ECM and take the vehicle for a test drive to ensure that the issue has been resolved.
- Monitor Performance: Keep an eye on the vehicle's performance and emissions levels to ensure that the repair was successful.
Cost to Fix P11FE 2015 Chevrolet Silverado
The typical repair costs for addressing the P11FE code on a 2015 Chevrolet Silverado can vary depending on the specific cause of the issue. In general, replacing a faulty NOx sensor 2 can cost between $200 and $400, while repairing damaged wiring or connectors may range from $100 to $300. Labor costs at auto repair shops typically range from $80 to $150 per hour, so the total repair bill could amount to $300 to $800 or more, depending on the extent of the repairs needed. It's advisable to consult with a trusted mechanic or dealership for a more accurate cost estimate based on your vehicle's specific needs and location.
Need more information about the P11FE 2015 Chevrolet Silverado code?
Need more information on how to fix the P11FE 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P11FE 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P11FE 2015 Chevrolet Silverado Code
1. What does the OBDII code P11FE mean on a 2015 Chevrolet Silverado?
P11FE indicates an issue with the O2 low reference circuit for NOx Sensor 2, showing a high voltage reading.
2. What are the common symptoms of P11FE in a 2015 Chevrolet Silverado?
Symptoms include the check engine light turning on, reduced fuel efficiency, poor engine performance, and possible emissions test failure.
3. What causes the P11FE code to appear on a 2015 Chevrolet Silverado?
Common causes include a faulty NOx Sensor 2, damaged wiring or connectors in the O2 low reference circuit, or a malfunctioning engine control module (ECM).
4. Can you drive a 2015 Chevrolet Silverado with the P11FE code?
Driving with this code is possible but not recommended, as it can lead to reduced performance and potential damage to the emissions system.
5. How do you diagnose the P11FE code on a 2015 Chevrolet Silverado?
Start by inspecting the wiring and connectors for damage, test the NOx Sensor 2 for proper function, and use a scan tool to check for related codes or data.
6. How do you fix the P11FE code on a 2015 Chevrolet Silverado?
Repairs may include replacing the NOx Sensor 2, repairing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary.
7. How much does it cost to fix the P11FE code on a 2015 Chevrolet Silverado?
The cost can range from $200 to $600 depending on whether the NOx sensor or wiring needs replacement, or if ECM reprogramming is required.
8. Can a dirty or clogged NOx sensor cause the P11FE code?
Yes, a dirty or malfunctioning NOx Sensor 2 can result in incorrect readings and trigger the P11FE code.
9. Does the P11FE code affect fuel economy in a 2015 Chevrolet Silverado?
Yes, this code can cause reduced fuel efficiency due to incorrect air-fuel mixture adjustments by the ECM.
10. Is it necessary to replace the NOx Sensor 2 for the P11FE code?
Not always. Inspect and test the sensor first, as the issue could be with the wiring, connectors, or ECM rather than the sensor itself.
Discuss the causes and fixes for P11FE 2015 Chevrolet Silverado OBDII Code
Code P11FE 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.