P11FE 2014 GMC Sierra Code - O2 Low Reference Circuit High Voltage (NOx Sensor 2)
Quick Answer
The P11FE diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the O2 Low Reference Circuit High Voltage, specifically related to NOx Sensor 2. Common causes include Faulty NOx sensor 2, Wiring or connector issues in the O2 sensor circuit, ECM software or hardware malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P11FE 2014 GMC Sierra indicates O2 Low Reference Circuit High Voltage (NOx Sensor 2).
- Common causes
- Common causes include Faulty NOx sensor 2, Wiring or connector issues in the O2 sensor circuit, ECM software or hardware malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P11FE 2014 GMC Sierra Description
The P11FE diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the O2 Low Reference Circuit High Voltage, specifically related to NOx Sensor 2. This code points to a problem with the oxygen sensor's low reference circuit, which is responsible for providing a stable voltage signal to the engine control module (ECM) for accurate fuel management and emissions control. The NOx sensor plays a crucial role in monitoring and reducing nitrogen oxide emissions from the vehicle's exhaust system.
Common Causes of P11FE 2014 GMC Sierra
- Faulty NOx sensor 2
- Wiring or connector issues in the O2 sensor circuit
- ECM software or hardware malfunction
- Exhaust leaks near the sensor
- Contamination of the sensor by oil or coolant
Symptoms of P11FE 2014 GMC Sierra
- Decreased fuel efficiency
- Rough idling or stalling
- Check Engine Light illuminated
- Increased emissions
- Reduced engine performance
How to Fix P11FE 2014 GMC Sierra
- Begin by conducting a thorough inspection of the NOx sensor 2 and its wiring for any visible damage or corrosion.
- Test the sensor's voltage output using a multimeter to determine if it falls within the manufacturer's specified range.
- If the sensor is faulty, replace it with a new, OEM-quality sensor.
- Check and repair any damaged wiring or connectors in the O2 sensor circuit.
- Clear the DTC from the ECM's memory and perform a test drive to ensure the issue has been resolved.
Cost to Fix P11FE 2014 GMC Sierra
The typical repair costs for addressing a P11FE code on a 2014 GMC Sierra can range from $200 to $500, including parts and labor. However, it's important to note that actual costs may vary depending on the specific diagnosis time and labor rates at auto repair shops. Rates can fluctuate based on factors such as location, vehicle make and model, and engine type. It's recommended to inquire about local rates to obtain a more accurate estimate for this repair.
Need more information about the P11FE 2014 GMC Sierra code?
Need more information on how to fix the P11FE 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P11FE 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P11FE 2014 GMC Sierra Code
1. What does the OBDII code P11FE mean on a 2014 GMC Sierra?
The P11FE code indicates a fault in the O2 low reference circuit of NOx Sensor 2, where the voltage is higher than expected.
2. What are the symptoms of the P11FE code in a 2014 GMC Sierra?
Common symptoms include the check engine light turning on, reduced fuel efficiency, and possible performance issues such as rough idling or decreased power.
3. What causes the P11FE code to appear on a GMC Sierra?
Possible causes include a faulty NOx Sensor 2, damaged wiring or connectors in the O2 low reference circuit, or a malfunctioning engine control module (ECM).
4. How do you diagnose the P11FE code on a 2014 GMC Sierra?
Diagnosis involves using a scan tool to confirm the code, inspecting the wiring and connectors for damage, and testing the NOx sensor voltage signal for abnormalities.
5. Can you drive a 2014 GMC Sierra with the P11FE code?
Driving with this code is possible but not recommended, as it may lead to increased emissions and long-term damage to the exhaust or emissions system.
6. How do you fix the P11FE code on a GMC Sierra?
Repairs may include replacing the NOx Sensor 2, repairing or replacing damaged wiring, or reprogramming or replacing the ECM if necessary.
7. How much does it cost to fix the P11FE code on a GMC Sierra?
The cost can vary, with a replacement NOx sensor typically costing $300-$600, plus labor. Wiring repairs or ECM replacement may add to the expense.
8. Can a dirty NOx sensor cause the P11FE code?
Yes, a dirty or contaminated NOx sensor can affect its performance, leading to incorrect voltage readings and triggering the P11FE code.
9. What tools are needed to troubleshoot the P11FE code?
Common tools include an OBDII scan tool, a multimeter for testing voltage, and possibly a repair manual for the 2014 GMC Sierra.
10. Is the P11FE code covered under warranty for a 2014 GMC Sierra?
It may be covered under the emissions warranty if the vehicle is within the warranty period. Check with your GMC dealer for details.
Discuss the causes and fixes for P11FE 2014 GMC Sierra OBDII Code
Code P11FE 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.