P11FC 2016 Chevrolet Silverado Code - O2 Low Reference Circuit (NOx Sensor 2)
Quick Answer
The P11FC diagnostic trouble code (DTC) for a 2016 Chevrolet Silverado refers to an issue with the O2 Low Reference Circuit related to NOx Sensor 2. Common causes include Faulty NOx Sensor: The issue could be caused by a malfunctioning NOx sensor 2, which may need to be replaced, Wiring Issues: Problems with the wiring or connectors in the O2 low reference circuit can lead to this code being triggered, ECM Malfunction: A fault in the engine control module (ECM) could also be responsible for the O2 low reference circuit error. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P11FC 2016 Chevrolet Silverado indicates O2 Low Reference Circuit (NOx Sensor 2).
- Common causes
- Common causes include Faulty NOx Sensor: The issue could be caused by a malfunctioning NOx sensor 2, which may need to be replaced, Wiring Issues: Problems with the wiring or connectors in the O2 low reference circuit can lead to this code being triggered, ECM Malfunction: A fault in the engine control module (ECM) could also be responsible for the O2 low reference circuit error.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P11FC 2016 Chevrolet Silverado Description
The P11FC diagnostic trouble code (DTC) for a 2016 Chevrolet Silverado refers to an issue with the O2 Low Reference Circuit related to NOx Sensor 2. This code indicates a problem with the oxygen sensor's low reference circuit, specifically for the NOx (nitrogen oxide) sensor 2. The NOx sensor plays a crucial role in monitoring and controlling the levels of nitrogen oxides in the exhaust gases emitted by the vehicle. The O2 sensor measures the oxygen content in the exhaust gases to help the engine control module (ECM) adjust the air-fuel mixture for optimal combustion.
Common Causes of P11FC 2016 Chevrolet Silverado
- Faulty NOx Sensor: The issue could be caused by a malfunctioning NOx sensor 2, which may need to be replaced.
- Wiring Issues: Problems with the wiring or connectors in the O2 low reference circuit can lead to this code being triggered.
- ECM Malfunction: A fault in the engine control module (ECM) could also be responsible for the O2 low reference circuit error.
- Exhaust System Leaks: Leaks in the exhaust system can affect the sensor readings and trigger this code.
- Sensor Contamination: Contamination of the sensor by oil, coolant, or other substances can also cause issues with the O2 low reference circuit.
Symptoms of P11FC 2016 Chevrolet Silverado
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Reduced Fuel Efficiency: A faulty O2 low reference circuit can result in decreased fuel efficiency as the engine may not be able to adjust the air-fuel mixture accurately.
- Poor Engine Performance: The vehicle may experience rough idling, hesitation, or lack of power due to incorrect sensor readings.
- Increased Emissions: The vehicle may fail emissions tests or emit higher levels of pollutants due to the malfunctioning sensor.
How to Fix P11FC 2016 Chevrolet Silverado
- Diagnose the Issue: Use a diagnostic scanner to retrieve the DTC and pinpoint the exact cause of the problem.
- Inspect Wiring and Connectors: Check the wiring and connectors in the O2 low reference circuit for any damage or corrosion. Repair or replace as needed.
- Test NOx Sensor: Test the NOx sensor 2 to determine if it is functioning correctly. Replace if necessary.
- Clear Codes: After making the necessary repairs, clear the DTC and reset the check engine light.
- Test Drive: Take the vehicle for a test drive to ensure that the issue has been resolved and that the sensor is providing accurate readings.
Cost to Fix P11FC 2016 Chevrolet Silverado
The cost of repairing the O2 Low Reference Circuit (NOx Sensor 2) issue on a 2016 Chevrolet Silverado can vary depending on the specific cause of the problem. In general, the cost of replacing a NOx sensor can range from $200 to $500, including parts and labor. However, additional costs may be incurred if wiring repairs or ECM replacement is necessary. It's important to note that labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. It's recommended to consult with a local mechanic or dealership for a more accurate estimate based on your location and vehicle specifics.
Need more information about the P11FC 2016 Chevrolet Silverado code?
Need more information on how to fix the P11FC 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P11FC 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P11FC 2016 Chevrolet Silverado Code
What does the OBDII code P11FC mean on a 2016 Chevrolet Silverado?
The P11FC code indicates a problem with the O2 low reference circuit related to NOx Sensor 2, which monitors nitrogen oxide levels in the exhaust system.
What are the common symptoms of the P11FC code in a 2016 Chevrolet Silverado?
Common symptoms include the check engine light turning on, reduced fuel efficiency, poor engine performance, and possible emissions test failure.
What causes the P11FC code to appear on a 2016 Chevrolet Silverado?
The code can be triggered by a faulty NOx sensor 2, damaged wiring or connectors in the low reference circuit, or issues with the engine control module (ECM).
Can a bad NOx sensor cause the P11FC code?
Yes, a malfunctioning NOx sensor 2 is one of the primary causes of the P11FC code.
How do you diagnose the P11FC code on a 2016 Chevrolet Silverado?
Diagnosis involves scanning the vehicle with an OBDII scanner, inspecting the wiring and connectors of NOx Sensor 2, and testing the sensor itself for proper operation.
Is it safe to drive a 2016 Chevrolet Silverado with the P11FC code?
While the vehicle may still be drivable, ignoring the code could lead to reduced performance, higher emissions, and potential damage to the exhaust system.
How do you fix the P11FC code in a 2016 Chevrolet Silverado?
Repairs may include replacing NOx Sensor 2, repairing damaged wiring or connectors, or updating/reprogramming the ECM if necessary.
Can a software issue cause the P11FC code?
Yes, outdated or corrupted ECM software can occasionally cause this code and may require reprogramming or updates.
What tools are needed to diagnose and fix the P11FC code?
You'll need an OBDII scanner, a multimeter to check wiring, and possibly specialized tools to remove and replace the NOx sensor.
How much does it cost to repair the P11FC code on a 2016 Chevrolet Silverado?
Repair costs vary but typically range from $200 to $600, depending on whether the NOx sensor needs replacement or if additional wiring repairs are required.
Discuss the causes and fixes for P11FC 2016 Chevrolet Silverado OBDII Code
Code P11FC 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.