P119F 2017 GMC Sierra Code - NOx Sensor 2 Signal Circuit High Voltage
Quick Answer
The P119F diagnostic trouble code (DTC) for a 2017 GMC Sierra indicates a problem with the NOx (Nitrogen Oxide) Sensor 2 Signal Circuit registering a high voltage. Common causes include Faulty NOx Sensor: The NOx sensor itself may be defective or damaged, leading to incorrect voltage readings, Wiring or Connector Issues: Damaged wiring or connectors in the NOx sensor circuit can cause high voltage signals to be sent to the ECM, ECM Malfunction: Problems with the engine control module (ECM) that processes the NOx sensor signals can result in erroneous voltage readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P119F 2017 GMC Sierra indicates NOx Sensor 2 Signal Circuit High Voltage.
- Common causes
- Common causes include Faulty NOx Sensor: The NOx sensor itself may be defective or damaged, leading to incorrect voltage readings, Wiring or Connector Issues: Damaged wiring or connectors in the NOx sensor circuit can cause high voltage signals to be sent to the ECM, ECM Malfunction: Problems with the engine control module (ECM) that processes the NOx sensor signals can result in erroneous voltage readings.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P119F 2017 GMC Sierra Description
The P119F diagnostic trouble code (DTC) for a 2017 GMC Sierra indicates a problem with the NOx (Nitrogen Oxide) Sensor 2 Signal Circuit registering a high voltage. The NOx sensor is a crucial component in the vehicle's emissions control system, responsible for monitoring and regulating the levels of nitrogen oxides in the exhaust gases. When the NOx Sensor 2 Signal Circuit reports a high voltage, it suggests that there is an issue with the sensor's ability to accurately measure the NOx levels, which can lead to increased emissions and potential compliance issues with environmental regulations.
Common Causes of P119F 2017 GMC Sierra
- Faulty NOx Sensor: The NOx sensor itself may be defective or damaged, leading to incorrect voltage readings.
- Wiring or Connector Issues: Damaged wiring or connectors in the NOx sensor circuit can cause high voltage signals to be sent to the ECM.
- ECM Malfunction: Problems with the engine control module (ECM) that processes the NOx sensor signals can result in erroneous voltage readings.
- Exhaust System Leaks: Leaks in the exhaust system can affect the NOx sensor's readings and trigger a high voltage signal.
- Contaminated Exhaust Gas: Contaminants in the exhaust gases can interfere with the NOx sensor's ability to accurately measure nitrogen oxide levels.
Symptoms of P119F 2017 GMC Sierra
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Engine Performance: The vehicle may experience a decrease in power or acceleration due to the engine entering a reduced power mode.
- Increased Emissions: A malfunctioning NOx sensor can lead to higher emissions of nitrogen oxides, potentially causing the vehicle to fail emissions tests.
- Rough Idle: The engine may exhibit rough idling or fluctuations in RPM due to the inaccurate NOx sensor readings.
How to Fix P119F 2017 GMC Sierra
- Diagnose the Issue: Use a diagnostic scanner to retrieve the specific DTC and perform a thorough inspection of the NOx sensor, wiring, and connectors.
- Replace the NOx Sensor: If the sensor is found to be faulty, replace it with a new, OEM-quality NOx sensor compatible with the vehicle.
- Repair Wiring or Connectors: Inspect the wiring and connectors in the NOx sensor circuit for damage or corrosion, and repair or replace as necessary.
- Check ECM Functionality: Verify the ECM's functionality by checking for any stored codes or performing a relearn procedure to recalibrate the system.
- Clear DTCs and Test Drive: Clear the DTC from the vehicle's memory using the diagnostic scanner and take the vehicle for a test drive to ensure the issue has been resolved.
Cost to Fix P119F 2017 GMC Sierra
The typical repair costs for addressing a P119F NOx Sensor 2 Signal Circuit High Voltage code can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. In general, the cost of replacing a NOx sensor can range from $200 to $500, including parts and labor. However, additional costs may apply if wiring repairs or ECM diagnostics are needed. It's advisable to check with local auto repair shops for more accurate estimates, as labor rates can vary between $80 and $150 per hour. Dealerships or specialized emission repair facilities may charge higher rates, while independent shops could offer more competitive pricing.
Need more information about the P119F 2017 GMC Sierra code?
Need more information on how to fix the P119F 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P119F 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P119F 2017 GMC Sierra Code
1. What does the OBDII code P119F mean on a 2017 GMC Sierra?
P119F indicates a high voltage issue in the signal circuit of NOx Sensor 2, which monitors nitrogen oxide levels in the exhaust system.
2. What are the common symptoms of a P119F code on a 2017 GMC Sierra?
Symptoms may include the check engine light turning on, reduced fuel efficiency, increased emissions, or the vehicle entering limp mode.
3. What causes the P119F code on a 2017 GMC Sierra?
Common causes include a faulty NOx Sensor 2, damaged wiring or connectors in the sensor circuit, or issues with the vehicle's ECM (engine control module).
4. Can I drive my 2017 GMC Sierra with a P119F code?
It is not recommended to drive for extended periods with this code, as it can lead to reduced performance, increased emissions, and potential damage to the exhaust system.
5. How do you diagnose the P119F code on a 2017 GMC Sierra?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the wiring and connectors for damage, and testing the NOx sensor for proper function.
6. How do you fix the P119F code on a 2017 GMC Sierra?
Repairs may include replacing the NOx Sensor 2, repairing or replacing damaged wiring or connectors, or updating/reprogramming the ECM if necessary.
7. What is NOx Sensor 2 on a 2017 GMC Sierra?
NOx Sensor 2 is a part of the emissions control system that measures nitrogen oxide levels downstream in the exhaust system to help regulate emissions.
8. How much does it cost to repair a P119F code on a 2017 GMC Sierra?
Repair costs can vary, but replacing a NOx sensor typically ranges from $300 to $600, including parts and labor. Wiring repairs may cost less.
9. Can a dirty or clogged exhaust system cause the P119F code?
While less common, excessive soot or buildup in the exhaust system can contribute to sensor issues and trigger this code.
10. Does the P119F code require reprogramming the ECM on a 2017 GMC Sierra?
Reprogramming the ECM may be required if the issue is related to outdated software or incorrect parameter settings. A professional diagnosis is recommended.
Discuss the causes and fixes for P119F 2017 GMC Sierra OBDII Code
Code P119F 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.