P119E 2017 Chevrolet Silverado Code - NOx Sensor 2 Signal Circuit Low Voltage
Quick Answer
The P119E diagnostic trouble code (DTC) for a 2017 Chevrolet Silverado indicates a problem with the NOx (Nitrogen Oxide) Sensor 2 Signal Circuit showing low voltage. Common causes include Faulty NOx Sensor: The NOx sensor itself may be malfunctioning, providing incorrect readings to the ECM, Damaged Wiring or Connectors: Issues such as corrosion, breaks, or shorts in the wiring harness or connectors can disrupt the signal from the sensor, ECM Malfunction: A problem with the engine control module can prevent proper communication with the NOx sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P119E 2017 Chevrolet Silverado indicates NOx Sensor 2 Signal Circuit Low Voltage.
- Common causes
- Common causes include Faulty NOx Sensor: The NOx sensor itself may be malfunctioning, providing incorrect readings to the ECM, Damaged Wiring or Connectors: Issues such as corrosion, breaks, or shorts in the wiring harness or connectors can disrupt the signal from the sensor, ECM Malfunction: A problem with the engine control module can prevent proper communication with the NOx sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P119E 2017 Chevrolet Silverado Description
The P119E diagnostic trouble code (DTC) for a 2017 Chevrolet Silverado indicates a problem with the NOx (Nitrogen Oxide) Sensor 2 Signal Circuit showing low voltage. The NOx sensor is a crucial component in the vehicle's emissions control system, responsible for monitoring and measuring the levels of nitrogen oxide in the exhaust gases. This information is essential for the engine control module (ECM) to adjust the air-fuel mixture and optimize combustion for reduced emissions.
Common Causes of P119E 2017 Chevrolet Silverado
- Faulty NOx Sensor: The NOx sensor itself may be malfunctioning, providing incorrect readings to the ECM.
- Damaged Wiring or Connectors: Issues such as corrosion, breaks, or shorts in the wiring harness or connectors can disrupt the signal from the sensor.
- ECM Malfunction: A problem with the engine control module can prevent proper communication with the NOx sensor.
- Exhaust System Leaks: Leaks in the exhaust system can affect the readings of the NOx sensor, leading to low voltage signals.
- Contaminated Exhaust Gas: Build-up of contaminants in the exhaust gases can interfere with the sensor's operation.
Symptoms of P119E 2017 Chevrolet Silverado
- Check Engine Light: The most common symptom associated with this DTC is the illumination of the check engine light on the dashboard.
- Reduced Fuel Efficiency: A malfunctioning NOx sensor can lead to improper fuel mixture adjustments, resulting in decreased fuel efficiency.
- Poor Performance: The vehicle may experience rough idling, hesitation, or lack of power due to incorrect engine adjustments.
- Failed Emissions Test: If the NOx levels are not accurately monitored and controlled, the vehicle may fail emissions tests.
- Increased Emissions: The vehicle may emit higher levels of nitrogen oxide pollutants, contributing to environmental pollution.
How to Fix P119E 2017 Chevrolet Silverado
- Diagnose the Issue: Use a diagnostic scanner to retrieve the DTC and perform further testing to pinpoint the exact cause of the low voltage signal from the NOx Sensor 2.
- Inspect Wiring and Connectors: Check the wiring harness and connectors for any damage, corrosion, or loose connections. Repair or replace as necessary.
- Test NOx Sensor: Test the NOx sensor itself to determine if it is functioning correctly. Replace the sensor if it is faulty.
- Clear DTC and Reset ECM: After completing the repairs, clear the DTC from the ECM and reset the system to see if the issue has been resolved.
- Perform Emissions Test: Once the repair is completed, it is advisable to perform an emissions test to ensure the vehicle meets regulatory standards.
Cost to Fix P119E 2017 Chevrolet Silverado
The typical repair costs for addressing a P119E DTC related to the NOx Sensor 2 Signal Circuit low voltage on a 2017 Chevrolet Silverado can vary depending on the specific cause of the issue. In general, the cost of replacing a NOx sensor can range from $200 to $500, including parts and labor. However, if the problem is related to wiring or connectors, additional diagnostic time and repair costs may be incurred.
Need more information about the P119E 2017 Chevrolet Silverado code?
Need more information on how to fix the P119E 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P119E 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P119E 2017 Chevrolet Silverado Code
What does the OBDII code P119E mean on a 2017 Chevrolet Silverado?
P119E indicates a low voltage issue in the signal circuit of NOx Sensor 2, which monitors nitrogen oxide emissions to ensure proper exhaust system function.
What are the common symptoms of P119E in a 2017 Chevrolet Silverado?
Symptoms may include the check engine light turning on, reduced engine performance, increased emissions, or poor fuel economy.
What causes the P119E code to appear?
Common causes include a faulty NOx Sensor 2, damaged wiring or connectors in the sensor circuit, or issues with the vehicle's engine control module (ECM).
Can a bad NOx Sensor 2 cause drivability issues?
Yes, a failing NOx Sensor 2 can lead to reduced engine performance, poor acceleration, or even limp mode in some cases.
How do I diagnose the P119E code on my Silverado?
Diagnosis involves inspecting the NOx Sensor 2 wiring and connectors for damage, testing the sensor for proper operation, and checking for ECM-related issues.
Is it safe to drive with the P119E code active?
Driving with this code is not recommended, as it may lead to increased emissions, reduced fuel efficiency, or further damage to the emissions system.
How much does it cost to repair the P119E code?
Repair costs vary but typically range from $300 to $800, depending on whether the NOx Sensor 2 or related wiring needs replacement.
Can the P119E code reset itself?
The code may clear temporarily if the issue is intermittent, but the underlying problem will likely cause it to reappear.
How can I prevent the P119E code from occurring again?
Regular maintenance, including checking wiring and ensuring the exhaust system is in good condition, can help prevent this code from recurring.
Do I need to replace the NOx Sensor 2 to fix the P119E code?
In most cases, replacing NOx Sensor 2 resolves the issue, but always perform a thorough diagnosis to rule out wiring or ECM problems before replacing parts.
Discuss the causes and fixes for P119E 2017 Chevrolet Silverado OBDII Code
Code P119E 2017 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.