P119E 2016 Chevrolet Silverado Code - NOx Sensor 2 Signal Circuit Low Voltage
Quick Answer
The P119E diagnostic trouble code (DTC) specifically refers to the NOx (Nitrogen Oxide) Sensor 2 Signal Circuit Low Voltage in a 2016 Chevrolet Silverado. Common causes include Faulty NOx Sensor: The most common cause of the P119E code is a malfunctioning NOx sensor, which may require replacement, Wiring Issues: Damaged or corroded wiring in the sensor circuit can disrupt the signal and trigger the low voltage code, Exhaust Leaks: Leaking exhaust gases can affect the sensor's readings and lead to erroneous low voltage signals. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P119E 2016 Chevrolet Silverado indicates NOx Sensor 2 Signal Circuit Low Voltage.
- Common causes
- Common causes include Faulty NOx Sensor: The most common cause of the P119E code is a malfunctioning NOx sensor, which may require replacement, Wiring Issues: Damaged or corroded wiring in the sensor circuit can disrupt the signal and trigger the low voltage code, Exhaust Leaks: Leaking exhaust gases can affect the sensor's readings and lead to erroneous low voltage signals.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P119E 2016 Chevrolet Silverado Description
The P119E diagnostic trouble code (DTC) specifically refers to the NOx (Nitrogen Oxide) Sensor 2 Signal Circuit Low Voltage in a 2016 Chevrolet Silverado. This code indicates that there is a problem with the NOx sensor's signal circuit, which is responsible for monitoring the levels of nitrogen oxides in the vehicle's exhaust gases. NOx sensors are crucial components in modern vehicles as they help control emissions and ensure compliance with environmental regulations.
Common Causes of P119E 2016 Chevrolet Silverado
- Faulty NOx Sensor: The most common cause of the P119E code is a malfunctioning NOx sensor, which may require replacement.
- Wiring Issues: Damaged or corroded wiring in the sensor circuit can disrupt the signal and trigger the low voltage code.
- Exhaust Leaks: Leaking exhaust gases can affect the sensor's readings and lead to erroneous low voltage signals.
- Engine Misfires: Poor combustion in the engine can result in abnormal levels of nitrogen oxides in the exhaust stream, triggering the code.
- ECU Malfunction: A malfunctioning Engine Control Unit (ECU) may not be properly interpreting the sensor data, leading to false low voltage readings.
Symptoms of P119E 2016 Chevrolet Silverado
- Check Engine Light: The most common symptom associated with the P119E code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Decreased Fuel Efficiency: A malfunctioning NOx sensor can lead to decreased fuel efficiency due to improper emissions control.
- Rough Idle: The engine may experience rough idling or hesitation during acceleration as a result of incorrect sensor readings.
- Failed Emissions Test: If the NOx levels are not within the acceptable range, the vehicle may fail emissions tests conducted during inspections.
- Reduced Engine Performance: In severe cases, the vehicle may experience reduced engine performance or enter a reduced power mode to protect the engine from harm.
How to Fix P119E 2016 Chevrolet Silverado
- Diagnostic Scan: Use a diagnostic scanner to retrieve the specific trouble code and confirm the issue with the NOx sensor.
- Inspect Wiring: Check the wiring harness connected to the NOx sensor for any signs of damage, corrosion, or loose connections.
- Test NOx Sensor: Test the NOx sensor using a multimeter to verify its functionality and determine if it needs replacement.
- Repair or Replace: Depending on the findings, repair any damaged wiring or replace the NOx sensor with a new, OEM part.
- Clear Codes: After completing the repairs, clear the DTC and reset the Check Engine Light to ensure the issue has been resolved.
Cost to Fix P119E 2016 Chevrolet Silverado
The cost of repairing a P119E NOx Sensor 2 Signal Circuit Low Voltage code in a 2016 Chevrolet Silverado can vary depending on the specific cause of the issue and the labor rates in your area. In general, the cost of replacing a NOx sensor can range from $200 to $500, including parts and labor. However, if the problem is related to wiring issues or other underlying factors, the cost may increase accordingly.
Need more information about the P119E 2016 Chevrolet Silverado code?
Need more information on how to fix the P119E 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P119E 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P119E 2016 Chevrolet Silverado Code
What does OBDII code P119E mean for a 2016 Chevrolet Silverado?
Code P119E indicates a problem with the NOx Sensor 2 signal circuit, specifically low voltage detected by the engine control module (ECM).
What are the symptoms of code P119E in a 2016 Chevrolet Silverado?
Common symptoms include reduced engine performance, increased emissions, poor fuel efficiency, and the check engine light being illuminated.
What causes code P119E in a 2016 Chevrolet Silverado?
Causes can include a faulty NOx sensor, damaged wiring or connectors, corrosion in the sensor circuit, or issues with the ECM itself.
Can I drive my 2016 Chevrolet Silverado with code P119E?
While the vehicle may still be drivable, prolonged operation with this code can lead to higher emissions and potential damage to the catalytic converter.
How is code P119E diagnosed in a 2016 Chevrolet Silverado?
Technicians use an OBDII scanner to retrieve the code, inspect the NOx sensor and circuit for damage or corrosion, and may perform live data analysis to confirm the low voltage issue.
How do you fix code P119E in a 2016 Chevrolet Silverado?
Repairs typically involve replacing the faulty NOx sensor, repairing damaged wiring or connectors, and clearing the code from the ECM.
Is the NOx Sensor 2 expensive to replace in a 2016 Chevrolet Silverado?
The cost of replacing the NOx sensor varies but typically ranges from $200 to $500, including parts and labor.
Can a dirty exhaust system cause code P119E in a 2016 Chevrolet Silverado?
A dirty or clogged exhaust system is unlikely to directly cause this code but can exacerbate issues with emissions sensors like the NOx sensor.
How can I prevent code P119E in my 2016 Chevrolet Silverado?
Regular maintenance, including checking exhaust components and wiring for damage, can help prevent NOx sensor issues and related codes.
Will a software update fix code P119E in a 2016 Chevrolet Silverado?
In some cases, a software update for the ECM may resolve the issue, but this is only applicable if the problem stems from incorrect programming rather than hardware failure.
Discuss the causes and fixes for P119E 2016 Chevrolet Silverado OBDII Code
Code P119E 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.