P119D 2018 GMC Sierra Code - NOx Sensor 2 Signal Circuit
Quick Answer
The P119D code for a 2018 GMC Sierra indicates a problem with the NOx Sensor 2 Signal Circuit. Common causes include Wiring issues or shorts in the NOx sensor circuit, Malfunctioning NOx sensor, Faulty ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P119D 2018 GMC Sierra indicates NOx Sensor 2 Signal Circuit.
- Common causes
- Common causes include Wiring issues or shorts in the NOx sensor circuit, Malfunctioning NOx sensor, Faulty ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P119D 2018 GMC Sierra Description
The P119D code for a 2018 GMC Sierra indicates a problem with the NOx Sensor 2 Signal Circuit. NOx sensors are responsible for monitoring the levels of nitrogen oxide gases in the exhaust system to ensure compliance with emissions standards. In this case, the code specifically refers to an issue with the signal circuit of the second NOx sensor.
Common Causes of P119D 2018 GMC Sierra
- Wiring issues or shorts in the NOx sensor circuit
- Malfunctioning NOx sensor
- Faulty ECM
- Exhaust system leaks
- Contaminated DEF (diesel exhaust fluid)
Symptoms of P119D 2018 GMC Sierra
- Decreased fuel efficiency
- Increased emissions
- Check Engine Light illuminated
- Engine misfires
- Rough idling
How to Fix P119D 2018 GMC Sierra
- Diagnose the issue using a diagnostic scanner to pinpoint the exact cause of the NOx Sensor 2 Signal Circuit problem.
- Inspect the wiring harness and connections for any damage or corrosion. Repair or replace as necessary.
- Test the NOx sensor for proper functionality and replace if it is malfunctioning.
- Check the ECM for any faults or errors, and reprogram or replace if needed.
- Clear the trouble codes, reset the ECM, and perform a test drive to ensure the issue has been resolved.
Cost to Fix P119D 2018 GMC Sierra
The typical repair costs for addressing a P119D code related to the NOx Sensor 2 Signal Circuit can range from $200 to $600, including parts and labor. However, it's important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It's advisable to check local rates for a more precise estimate.
Need more information about the P119D 2018 GMC Sierra code?
Need more information on how to fix the P119D 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P119D 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P119D 2018 GMC Sierra Code
What does the OBDII code P119D mean on a 2018 GMC Sierra?
P119D indicates an issue with the NOx Sensor 2 Signal Circuit, specifically a problem with the signal communication between the second NOx sensor and the vehicle's computer.
What are the symptoms of code P119D in a 2018 GMC Sierra?
Symptoms may include reduced engine performance, increased fuel consumption, an illuminated check engine light, and possibly a vehicle entering limp mode.
What causes the P119D code to appear?
Common causes include a faulty NOx sensor 2, damaged wiring or connectors in the sensor circuit, exhaust leaks near the sensor, or a malfunctioning engine control module (ECM).
How do you diagnose P119D on a 2018 GMC Sierra?
Diagnosis involves using a scan tool to confirm the code, inspecting the wiring and connectors for damage, checking the NOx sensor signal with a multimeter, and verifying there are no exhaust leaks.
Can you drive with the P119D code active?
It is not recommended to drive with this code active, as it can lead to reduced engine performance, higher emissions, and potential damage to the exhaust aftertreatment system.
How can you fix the P119D code on a 2018 GMC Sierra?
Repairs may involve replacing the faulty NOx sensor 2, repairing damaged wiring or connectors, fixing exhaust leaks, or reprogramming the ECM if necessary.
What is a NOx sensor, and why is it important?
A NOx sensor measures nitrogen oxide levels in the exhaust and helps control emissions. It plays a critical role in maintaining compliance with emissions regulations and optimizing engine performance.
How much does it cost to repair the P119D code?
Repair costs can range from $300 to $800, depending on whether the NOx sensor needs replacement or if wiring or exhaust repairs are required.
Can a bad NOx sensor damage the engine?
While a bad NOx sensor won't directly damage the engine, it can lead to poor performance, increased emissions, and strain on the exhaust aftertreatment system if not addressed.
How often should the NOx sensors be replaced on a 2018 GMC Sierra?
NOx sensors typically last 80,000 to 100,000 miles, but their lifespan can vary depending on driving conditions and maintenance habits.
Discuss the causes and fixes for P119D 2018 GMC Sierra OBDII Code
Code P119D 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.