P119D 2017 GMC Sierra Code - NOx Sensor 2 Signal Circuit
Quick Answer
The P119D diagnostic trouble code (DTC) specifically relates to the NOx (nitrogen oxide) sensor 2 signal circuit in a 2017 GMC Sierra. Common causes include Faulty NOx sensor 2, Wiring harness issues or shorts, ECM communication problems. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P119D 2017 GMC Sierra indicates NOx Sensor 2 Signal Circuit.
- Common causes
- Common causes include Faulty NOx sensor 2, Wiring harness issues or shorts, ECM communication problems.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P119D 2017 GMC Sierra Description
The P119D diagnostic trouble code (DTC) specifically relates to the NOx (nitrogen oxide) sensor 2 signal circuit in a 2017 GMC Sierra. The NOx sensor is a crucial component in the vehicle's emissions control system, responsible for monitoring the levels of nitrogen oxide in the exhaust gases. NOx sensors are typically found in vehicles equipped with diesel engines or advanced emissions control systems.
Common Causes of P119D 2017 GMC Sierra
- Faulty NOx sensor 2.
- Wiring harness issues or shorts.
- ECM communication problems.
- Exhaust leaks near the sensor.
- Contaminated sensor due to exhaust gases or other substances.
Symptoms of P119D 2017 GMC Sierra
- Check engine light illuminated on the dashboard.
- Decreased fuel efficiency.
- Rough idling or engine misfires.
- Failed emissions test.
- Reduced engine performance.
How to Fix P119D 2017 GMC Sierra
- Use an OBD-II scanner to confirm the P119D code and diagnose the specific issue with the NOx sensor 2 signal circuit.
- Inspect the wiring harness for any damage, corrosion, or loose connections. Repair or replace as needed.
- Check the NOx sensor 2 for proper operation and replace if faulty.
- Clear the DTC and reset the ECM to see if the issue persists.
- Perform a test drive to ensure the repair was successful and the code does not return.
Cost to Fix P119D 2017 GMC Sierra
The cost of repairing a NOx sensor 2 signal circuit issue can vary depending on the specific cause of the problem and the labor rates in your area. On average, the parts for a NOx sensor replacement can range from $200 to $500, while the labor costs can be between $100 and $300. Overall, the total repair cost for this issue may fall between $300 and $800. It's recommended to consult with a qualified mechanic or auto repair shop to get an accurate estimate based on your vehicle's make and model. Labor rates can vary significantly, so it's advisable to shop around for the best deal.
Need more information about the P119D 2017 GMC Sierra code?
Need more information on how to fix the P119D 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P119D 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P119D 2017 GMC Sierra Code
1. What does the OBDII code P119D mean on a 2017 GMC Sierra?
P119D indicates an issue with the NOx Sensor 2 Signal Circuit, typically related to the downstream nitrogen oxide (NOx) sensor located after the diesel particulate filter.
2. What are the common symptoms of P119D on a 2017 GMC Sierra?
Symptoms may include reduced fuel efficiency, illuminated check engine light, limp mode activation, or increased emissions.
3. What causes the P119D code to appear?
The code can be triggered by a faulty NOx sensor, damaged wiring or connectors in the sensor circuit, exhaust leaks, or a malfunctioning engine control module (ECM).
4. Can I drive my 2017 GMC Sierra with the P119D code?
Driving with this code is not recommended as it can lead to increased emissions, reduced engine performance, and potential damage to the exhaust after-treatment system.
5. How do I diagnose the P119D code on my GMC Sierra?
Start by inspecting the wiring and connectors for the NOx Sensor 2. Use a scan tool to verify the sensor's live data and compare it to specifications. If necessary, test the sensor's resistance and signal output.
6. Does the P119D code always mean the NOx sensor is bad?
Not always. It could also be caused by wiring issues, exhaust leaks, or problems with the ECM. Proper diagnosis is essential before replacing any parts.
7. How much does it cost to fix the P119D code on a 2017 GMC Sierra?
The repair cost depends on the cause. Replacing the NOx sensor can cost $300-$700, while fixing wiring or connectors might be less expensive.
8. Can a software update fix the P119D code?
In some cases, a software update for the ECM might resolve the issue if the problem is related to incorrect sensor calibration or programming.
9. How do I prevent the P119D code from reoccurring?
Regular maintenance of the exhaust system, ensuring clean diesel fluid, and promptly addressing any wiring or sensor issues can help prevent this code from recurring.
10. What happens if I ignore the P119D code on my GMC Sierra?
Ignoring the code can lead to further engine performance issues, increased emissions, and potential damage to the exhaust after-treatment system, leading to more expensive repairs.
Discuss the causes and fixes for P119D 2017 GMC Sierra OBDII Code
Code P119D 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.