P119D 2016 GMC Sierra Code - NOx Sensor 2 Signal Circuit
Quick Answer
The P119D diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates a problem with the NOx Sensor 2 Signal Circuit. Common causes include Faulty NOx sensor, Wiring or connector issues in the NOx sensor circuit, Exhaust leaks near the NOx sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P119D 2016 GMC Sierra indicates NOx Sensor 2 Signal Circuit.
- Common causes
- Common causes include Faulty NOx sensor, Wiring or connector issues in the NOx sensor circuit, Exhaust leaks near the NOx sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P119D 2016 GMC Sierra Description
The P119D diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates a problem with the NOx Sensor 2 Signal Circuit. The NOx sensor is a crucial component in the vehicle's emissions control system, responsible for monitoring the levels of nitrogen oxide (NOx) in the exhaust gases. NOx sensors are typically found in vehicles equipped with diesel engines or selective catalytic reduction (SCR) systems.
Common Causes of P119D 2016 GMC Sierra
- Faulty NOx sensor
- Wiring or connector issues in the NOx sensor circuit
- Exhaust leaks near the NOx sensor
- Engine running rich or lean
- Software or calibration issues in the engine control module (ECM)
Symptoms of P119D 2016 GMC Sierra
- Check engine light illuminated
- Reduced fuel efficiency
- Failed emissions test
- Rough idling or misfiring
- Decreased engine performance
How to Fix P119D 2016 GMC Sierra
- Begin by diagnosing the NOx sensor 2 signal circuit using a diagnostic scan tool to pinpoint the exact cause of the issue.
- Inspect the wiring and connectors associated with the NOx sensor for any damage, corrosion, or loose connections. Repair or replace as necessary.
- Check for exhaust leaks near the NOx sensor and repair any leaks found.
- Test the NOx sensor itself to determine if it is functioning correctly. Replace the sensor if it is faulty.
- Clear the DTC and reset the check engine light after completing the repairs.
Cost to Fix P119D 2016 GMC Sierra
The cost of repairing a NOx Sensor 2 Signal Circuit issue can vary depending on the specific cause of the problem and the labor rates in your area. Generally, the cost of replacing a NOx sensor can range from $200 to $500, including parts and labor. Additional costs may apply if wiring repairs or other components need attention. It's recommended to consult with a professional mechanic or auto repair shop for a more accurate estimate based on your vehicle's make and model. Keep in mind that labor rates can vary between different repair facilities.
Need more information about the P119D 2016 GMC Sierra code?
Need more information on how to fix the P119D 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P119D 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P119D 2016 GMC Sierra Code
What does the OBDII code P119D mean on a 2016 GMC Sierra?
P119D indicates an issue with the NOx Sensor 2 Signal Circuit, where the sensor is not sending proper signals to the engine control module (ECM).
What are the symptoms of code P119D on a 2016 GMC Sierra?
Common symptoms include the check engine light turning on, reduced fuel efficiency, increased emissions, or the vehicle entering limp mode.
What causes code P119D to appear on a 2016 GMC Sierra?
Possible causes include a faulty NOx sensor 2, wiring issues in the sensor circuit, damaged connectors, or an ECM-related problem.
Can driving with code P119D damage my 2016 GMC Sierra?
Driving with this code may not cause immediate damage but can lead to increased emissions, reduced engine performance, and potential long-term damage to the exhaust system.
How can I diagnose code P119D on my 2016 GMC Sierra?
Start by inspecting the wiring and connectors for damage, check the NOx sensor 2 for proper operation, and use a scan tool to monitor sensor data for abnormalities.
Is NOx Sensor 2 the same as the upstream or downstream sensor?
NOx Sensor 2 typically refers to the downstream sensor, located after the SCR (Selective Catalytic Reduction) system.
How do I fix code P119D on a 2016 GMC Sierra?
Fixes may include replacing the NOx sensor 2, repairing damaged wiring or connectors, updating the ECM software, or clearing the code with a scan tool after repairs.
How much does it cost to fix code P119D on a 2016 GMC Sierra?
Repair costs can vary, but replacing a NOx sensor typically costs between $300 and $800, depending on parts and labor.
Can a bad NOx sensor 2 affect fuel efficiency?
Yes, a malfunctioning NOx sensor can lead to improper air-fuel mixture adjustments, reducing fuel efficiency.
Do I need to reset the ECM after fixing code P119D on my 2016 GMC Sierra?
Yes, after completing repairs, clear the code with a scan tool and perform a drive cycle to ensure the issue is resolved.
Discuss the causes and fixes for P119D 2016 GMC Sierra OBDII Code
Code P119D 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.