P119C 2014 GMC Sierra Code - NOx Sensor 1 Signal Circuit High Voltage
Quick Answer
The P119C diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the NOx (Nitrogen Oxide) Sensor 1 Signal Circuit registering a high voltage. Common causes include Faulty NOx Sensor: The NOx sensor itself may be malfunctioning, leading to inaccurate readings and triggering the high voltage signal, Wiring or Connector Issues: Damaged or corroded wiring or connectors in the NOx sensor circuit can disrupt the signal and cause the high voltage reading, ECM Malfunction: A problem with the engine control module (ECM) can also result in erroneous readings from the NOx sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P119C 2014 GMC Sierra indicates NOx Sensor 1 Signal Circuit High Voltage.
- Common causes
- Common causes include Faulty NOx Sensor: The NOx sensor itself may be malfunctioning, leading to inaccurate readings and triggering the high voltage signal, Wiring or Connector Issues: Damaged or corroded wiring or connectors in the NOx sensor circuit can disrupt the signal and cause the high voltage reading, ECM Malfunction: A problem with the engine control module (ECM) can also result in erroneous readings from the NOx sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P119C 2014 GMC Sierra Description
The P119C diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the NOx (Nitrogen Oxide) Sensor 1 Signal Circuit registering a high voltage. The NOx sensor is a crucial component in the vehicle's emissions control system, specifically monitoring and measuring the levels of nitrogen oxide in the exhaust gases. When the NOx Sensor 1 Signal Circuit reports a high voltage, it means that the sensor is detecting an abnormal level of nitrogen oxide in the exhaust stream, which can lead to increased emissions and potential environmental harm.
Common Causes of P119C 2014 GMC Sierra
- Faulty NOx Sensor: The NOx sensor itself may be malfunctioning, leading to inaccurate readings and triggering the high voltage signal.
- Wiring or Connector Issues: Damaged or corroded wiring or connectors in the NOx sensor circuit can disrupt the signal and cause the high voltage reading.
- ECM Malfunction: A problem with the engine control module (ECM) can also result in erroneous readings from the NOx sensor.
- Exhaust System Leaks: Leaks in the exhaust system can affect the NOx sensor's readings and trigger the high voltage signal.
- Contaminated Exhaust Gas: If the exhaust gas contains contaminants, it can impact the NOx sensor's ability to measure nitrogen oxide levels accurately.
Symptoms of P119C 2014 GMC Sierra
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Fuel Efficiency: A malfunctioning NOx sensor can lead to poor fuel efficiency as the engine may not be operating at its optimal level.
- Rough Idling: The engine may experience rough idling or hesitation when the NOx sensor signal circuit is affected.
- Failed Emissions Test: If the NOx levels are not within the acceptable range, the vehicle may fail emissions tests.
How to Fix P119C 2014 GMC Sierra
- Diagnose the Issue: Use a diagnostic scanner to retrieve the trouble code and perform further testing to pinpoint the exact cause of the high voltage signal from the NOx sensor.
- Inspect Wiring and Connectors: Check the wiring and connectors in the NOx sensor circuit for any damage, corrosion, or loose connections. Repair or replace as necessary.
- Test NOx Sensor: Test the NOx sensor itself to determine if it is functioning correctly. Replace the sensor if it is found to be faulty.
- Check ECM Functionality: Verify that the engine control module (ECM) is operating properly and communicating with the NOx sensor correctly. Address any ECM issues if detected.
- Clear Codes and Test Drive: Clear the diagnostic trouble codes from the ECM, reset the system, and test drive the vehicle to ensure that the issue has been resolved.
Cost to Fix P119C 2014 GMC Sierra
The typical repair costs for addressing a NOx Sensor 1 Signal Circuit High Voltage issue can vary depending on the specific cause of the problem and the parts and labor required for the repair. In general, replacing a faulty NOx sensor can cost between $200 and $500, including parts and labor. However, if the issue is related to wiring or ECM problems, the repair costs may be higher. Additionally, diagnostic time and labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. It is advisable to consult with a qualified mechanic or dealership for a more accurate cost estimate based on your vehicle's make and model, as well as the extent of the repair needed.
Need more information about the P119C 2014 GMC Sierra code?
Need more information on how to fix the P119C 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P119C 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P119C 2014 GMC Sierra Code
No Frequently Asked Questions about P119C 2014 GMC Sierra Code found.
Discuss the causes and fixes for P119C 2014 GMC Sierra OBDII Code
Code P119C 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.