Engine-Codes.com
Engine-Codes – Chevrolet – P119C 2014 Chevrolet Silverado

P119C 2014 Chevrolet Silverado Code - NOx Sensor 1 Signal Circuit High Voltage

Quick Answer

The P119C diagnostic trouble code (DTC) indicates that the Engine Control Module (ECM) has detected a high voltage condition in the NOx (Nitrogen Oxide) sensor 1 signal circuit. Common causes include Faulty NOx Sensor: The most common cause is a defective NOx sensor that is unable to provide accurate readings, Wiring Issues: Damaged, frayed, or corroded wiring in the NOx sensor circuit can lead to high voltage readings, Poor Connections: Loose or corroded connectors can disrupt the signal, causing erroneous voltage levels. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P119C 2014 Chevrolet Silverado indicates NOx Sensor 1 Signal Circuit High Voltage.
Common causes
Common causes include Faulty NOx Sensor: The most common cause is a defective NOx sensor that is unable to provide accurate readings, Wiring Issues: Damaged, frayed, or corroded wiring in the NOx sensor circuit can lead to high voltage readings, Poor Connections: Loose or corroded connectors can disrupt the signal, causing erroneous voltage levels.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Oct 21, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P119C 2014 Chevrolet Silverado Description

The P119C diagnostic trouble code (DTC) indicates that the Engine Control Module (ECM) has detected a high voltage condition in the NOx (Nitrogen Oxide) sensor 1 signal circuit. The NOx sensor plays a critical role in monitoring the levels of nitrogen oxides in the exhaust gases, which is essential for meeting emissions standards and optimizing engine performance. When the ECM receives a signal indicating that the voltage from the NOx sensor is higher than the expected range, it triggers this code.

OBDII Code P119C 2014 Chevrolet Silverado - NOx Sensor 1 Signal Circuit High Voltage
P119C 2014 Chevrolet Silverado Code - NOx Sensor 1 Signal Circuit High Voltage

Common Causes of P119C 2014 Chevrolet Silverado

  1. Faulty NOx Sensor: The most common cause is a defective NOx sensor that is unable to provide accurate readings.
  2. Wiring Issues: Damaged, frayed, or corroded wiring in the NOx sensor circuit can lead to high voltage readings.
  3. Poor Connections: Loose or corroded connectors can disrupt the signal, causing erroneous voltage levels.
  4. Exhaust Leaks: Leaks in the exhaust system can affect the sensor's ability to measure NOx levels accurately.
  5. ECM Malfunction: In rare cases, a malfunctioning ECM may misinterpret the signals from the NOx sensor.

Symptoms of P119C 2014 Chevrolet Silverado

  1. Check Engine Light: The most immediate symptom is the illumination of the check engine light on the dashboard.
  2. Reduced Engine Performance: Drivers may notice a decrease in power, acceleration, or overall engine responsiveness.
  3. Increased Fuel Consumption: A malfunctioning NOx sensor can lead to inefficient fuel usage, resulting in higher fuel costs.
  4. Failed Emissions Test: The vehicle may fail an emissions inspection due to elevated NOx levels.
  5. Rough Idle or Stalling: In some cases, the vehicle may experience rough idling or stalling, particularly under load.

How to Fix P119C 2014 Chevrolet Silverado

  1. Diagnostic Scan: Begin by using a diagnostic scanner to confirm the P119C code and check for any related codes that may provide additional context.
  2. Visual Inspection: Conduct a thorough visual inspection of the NOx sensor, wiring, and connectors for any signs of damage or corrosion.
  3. Test the NOx Sensor: Use a multimeter to test the NOx sensor's voltage output and resistance to determine if it is functioning correctly.
  4. Repair or Replace Wiring/Connectors: If any wiring issues or poor connections are found, repair or replace them as necessary to ensure a solid electrical connection.
  5. Replace the NOx Sensor: If the sensor is confirmed to be faulty, replace it with a new, OEM-quality part to restore proper function.

Cost to Fix P119C 2014 Chevrolet Silverado

The cost to repair the P119C code can vary widely based on several factors, including the specific diagnosis time, labor rates, and parts required. On average, the total cost for diagnosing and repairing this issue can range from $200 to $800. This estimate includes parts, such as a new NOx sensor, which typically costs between $100 and $300, along with labor charges that can range from $80 to $150 per hour. It's important to note that labor rates may be higher at dealerships or in metropolitan areas, while independent shops often offer lower rates. Therefore, it is advisable to check local rates for a more precise estimate tailored to your specific situation.

Need more information about the P119C 2014 Chevrolet Silverado code?

Need more information on how to fix the P119C 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P119C 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P119C 2014 Chevrolet Silverado Code

1. What does the OBDII code P119C mean on a 2014 Chevrolet Silverado?

P119C indicates a high voltage issue in the signal circuit of NOx Sensor 1, which monitors nitrogen oxide levels in the exhaust system.

2. What are the common symptoms of code P119C on a 2014 Chevrolet Silverado?

Common symptoms include a check engine light, reduced fuel efficiency, poor engine performance, and potential activation of limp mode.

3. What causes the P119C code to appear on a 2014 Chevrolet Silverado?

Causes include a faulty NOx sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).

4. Can a dirty exhaust system trigger the P119C code?

While a dirty exhaust system itself may not directly trigger the code, excessive soot or deposits can impair NOx sensor function, leading to high voltage readings.

5. How do you diagnose a P119C code on a 2014 Chevrolet Silverado?

Diagnosis involves scanning the vehicle with an OBDII tool, checking the NOx sensor and related wiring for damage, and testing the sensor's voltage output with a multimeter.

6. Is it safe to drive with the P119C code active on my Silverado?

Driving with this code is generally not recommended, as it can lead to reduced engine performance and potential damage to the emissions system over time.

7. How can you fix the P119C code on a 2014 Chevrolet Silverado?

Fixes include replacing the faulty NOx sensor, repairing damaged wiring or connectors, and updating or reprogramming the ECM if necessary.

8. How much does it cost to repair a P119C code on a Silverado?

The cost can range from $200 to $600, depending on whether you need to replace the NOx sensor or perform additional repairs on the wiring or ECM.

9. Can a software update resolve the P119C code on my Silverado?

In some cases, a software update for the ECM can resolve communication or calibration issues related to the NOx sensor.

10. How often do NOx sensors fail on a 2014 Chevrolet Silverado?

NOx sensors typically last 80,000–100,000 miles, but factors like poor fuel quality or excessive exhaust soot can shorten their lifespan.

Discuss the causes and fixes for P119C 2014 Chevrolet Silverado OBDII Code

Submit a New Comment

Code P119C 2014 Chevrolet Silverado comments

No comments found for this page.