P119A 2017 GMC Sierra Code - NOx Sensor 1 Signal Circuit
Quick Answer
The P119A diagnostic trouble code (DTC) for a 2017 GMC Sierra specifically relates to the NOx (nitrogen oxide) Sensor 1 Signal Circuit. Common causes include Faulty NOx sensor, Wiring issues in the NOx sensor circuit, Corrosion or damage to sensor connectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P119A 2017 GMC Sierra indicates NOx Sensor 1 Signal Circuit.
- Common causes
- Common causes include Faulty NOx sensor, Wiring issues in the NOx sensor circuit, Corrosion or damage to sensor connectors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P119A 2017 GMC Sierra Description
The P119A diagnostic trouble code (DTC) for a 2017 GMC Sierra specifically relates to the NOx (nitrogen oxide) Sensor 1 Signal Circuit. This code indicates that there is a problem with the signal being sent by the NOx sensor located in the exhaust system of the vehicle. The NOx sensor is responsible for monitoring the levels of nitrogen oxide in the exhaust gases and sending this information to the engine control module (ECM) for proper fuel and emissions control.
Common Causes of P119A 2017 GMC Sierra
- Faulty NOx sensor
- Wiring issues in the NOx sensor circuit
- Corrosion or damage to sensor connectors
- Exhaust system leaks
- ECM software issues
Symptoms of P119A 2017 GMC Sierra
- Decreased fuel efficiency
- Increased emissions
- Engine misfires
- Rough idling
- Illumination of the check engine light
How to Fix P119A 2017 GMC Sierra
- Begin by conducting a thorough inspection of the NOx sensor and its wiring for any visible damage or corrosion.
- Test the NOx sensor using a multimeter to check for proper resistance and voltage readings.
- If the sensor is faulty, replace it with a new OEM sensor to ensure proper functionality.
- Check and repair any damaged wiring or connectors in the NOx sensor circuit.
- Clear the DTC with a scan tool and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P119A 2017 GMC Sierra
The typical repair costs for addressing a P119A NOx Sensor 1 Signal Circuit issue can vary depending on the specific diagnosis and repair needed. In general, replacing a NOx sensor can cost between $200 and $500, including parts and labor. However, additional costs may apply if there are wiring issues or other components that need to be repaired. It's recommended to consult with a qualified mechanic or dealership for a more accurate estimate based on the specific circumstances of your vehicle. Keep in mind that labor rates can vary between different auto repair shops, so it's advisable to research local rates for a more precise cost estimate.
Need more information about the P119A 2017 GMC Sierra code?
Need more information on how to fix the P119A 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P119A 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P119A 2017 GMC Sierra Code
1. What does the OBDII code P119A mean on a 2017 GMC Sierra?
P119A indicates an issue with the NOx Sensor 1 Signal Circuit, which monitors nitrogen oxide levels in the exhaust to ensure proper emissions control.
2. What are the common symptoms of code P119A on a GMC Sierra?
Common symptoms include the Check Engine Light turning on, reduced fuel efficiency, poor engine performance, and possible limp mode activation.
3. What causes the P119A code to appear on a 2017 GMC Sierra?
This code can be triggered by a faulty NOx sensor, damaged wiring or connectors, excessive soot buildup on the sensor, or an issue with the vehicle’s ECM.
4. Can a dirty or faulty NOx sensor cause the P119A code?
Yes, a dirty or malfunctioning NOx sensor can cause inaccurate readings, triggering the P119A code.
5. How do you diagnose the P119A trouble code on a GMC Sierra?
Diagnosis involves scanning for codes with an OBDII scanner, visually inspecting the NOx sensor and wiring, testing the sensor with a multimeter, and checking for soot buildup or exhaust leaks.
6. Can I drive my 2017 GMC Sierra with the P119A code?
Driving with this code is not recommended, as it may lead to increased emissions, reduced fuel efficiency, or further damage to the emissions system.
7. How do you fix the P119A code on a GMC Sierra?
Common fixes include replacing the faulty NOx sensor, repairing damaged wiring or connectors, cleaning the sensor, or updating/reprogramming the ECM if needed.
8. How much does it cost to repair a P119A code on a 2017 GMC Sierra?
Repair costs vary but typically range from $300 to $800, depending on whether the NOx sensor needs replacement, cleaning, or wiring repair.
9. Can a software update resolve the P119A code?
In some cases, reprogramming or updating the ECM software may resolve the issue if the code is triggered by a software-related fault.
10. How can I prevent the P119A code from reoccurring?
Regular maintenance, using high-quality fuel, ensuring proper DEF fluid levels, and inspecting the exhaust system periodically can help prevent this code from reoccurring.
Discuss the causes and fixes for P119A 2017 GMC Sierra OBDII Code
Code P119A 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.