Engine-Codes.com
Engine-Codes – GMC – P119A 2014 GMC Sierra

P119A 2014 GMC Sierra Code - NOx Sensor 1 Signal Circuit

Quick Answer

The P119A diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the NOx (Nitrogen Oxide) Sensor 1 Signal Circuit. Common causes include Faulty NOx Sensor: The sensor itself may be malfunctioning, leading to inaccurate readings being sent to the ECM, Wiring Issues: Problems with the wiring harness or connectors connected to the NOx sensor can cause signal disruptions, Corrosion: Corrosion on the sensor or its connectors can interfere with the signal being sent to the ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P119A 2014 GMC Sierra indicates NOx Sensor 1 Signal Circuit.
Common causes
Common causes include Faulty NOx Sensor: The sensor itself may be malfunctioning, leading to inaccurate readings being sent to the ECM, Wiring Issues: Problems with the wiring harness or connectors connected to the NOx sensor can cause signal disruptions, Corrosion: Corrosion on the sensor or its connectors can interfere with the signal being sent to the ECM.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P119A 2014 GMC Sierra Description

The P119A diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the NOx (Nitrogen Oxide) Sensor 1 Signal Circuit. This sensor is responsible for monitoring the levels of nitrogen oxide in the exhaust gases and providing feedback to the engine control module (ECM) to ensure proper emissions control. When this code is triggered, it means that the ECM has detected a problem with the signal coming from the NOx sensor, which can lead to issues with the vehicle's emissions, fuel efficiency, and overall performance.

OBDII Code P119A 2014 GMC Sierra - NOx Sensor 1 Signal Circuit
P119A 2014 GMC Sierra Code - NOx Sensor 1 Signal Circuit

Common Causes of P119A 2014 GMC Sierra

  1. Faulty NOx Sensor: The sensor itself may be malfunctioning, leading to inaccurate readings being sent to the ECM.
  2. Wiring Issues: Problems with the wiring harness or connectors connected to the NOx sensor can cause signal disruptions.
  3. Corrosion: Corrosion on the sensor or its connectors can interfere with the signal being sent to the ECM.
  4. Sensor Contamination: The sensor may become contaminated with soot, oil, or other debris, affecting its ability to accurately measure nitrogen oxide levels.

Symptoms of P119A 2014 GMC Sierra

  1. Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
  2. Reduced Fuel Efficiency: A faulty NOx sensor can lead to decreased fuel efficiency as the engine may not be running optimally.
  3. Poor Performance: The vehicle may experience a decrease in performance, such as rough idling or hesitation during acceleration.
  4. Failed Emissions Test: If the NOx sensor is not functioning properly, the vehicle may fail an emissions test due to increased nitrogen oxide emissions.

How to Fix P119A 2014 GMC Sierra

  1. Diagnose the Issue: Use a diagnostic scanner to retrieve the trouble code and perform further testing to determine the exact cause of the problem.
  2. Inspect Wiring and Connectors: Check the wiring harness and connectors for any damage, corrosion, or loose connections. Repair or replace as needed.
  3. Replace NOx Sensor: If the sensor is found to be faulty, contaminated, or damaged, it will need to be replaced with a new one.
  4. Clear Codes: After making the necessary repairs, clear the DTCs from the ECM's memory and test drive the vehicle to ensure the issue has been resolved.
  5. Perform Emissions Test: If the vehicle failed an emissions test due to this issue, retest the vehicle to ensure it now meets the required emissions standards.

Cost to Fix P119A 2014 GMC Sierra

The cost of repairing a NOx sensor 1 signal circuit issue can vary depending on the specific cause of the problem and the cost of parts and labor. In general, the cost of a new NOx sensor can range from $200 to $500, depending on the make and model of the vehicle. Labor costs for this repair can range from $100 to $300, depending on the shop's hourly rates and the complexity of the repair. Overall, the total cost of repairing a P119A DTC for a 2014 GMC Sierra could range from $300 to $800. It's important to note that these are rough estimates, and actual costs may vary based on individual circumstances and location. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate cost estimate.

Need more information about the P119A 2014 GMC Sierra code?

Need more information on how to fix the P119A 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P119A 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P119A 2014 GMC Sierra Code

1. What does the OBDII code P119A mean for a 2014 GMC Sierra?

P119A indicates an issue with the NOx Sensor 1 Signal Circuit, which monitors nitrogen oxide levels in the exhaust system to ensure proper emissions control.

2. What are the common symptoms of code P119A?

Symptoms may include the check engine light turning on, reduced engine performance, increased fuel consumption, and potential failure to pass emissions testing.

3. What causes code P119A to appear on a 2014 GMC Sierra?

Common causes include a faulty NOx sensor, damaged wiring or connectors in the sensor circuit, exhaust system leaks, or issues with the vehicle’s engine control module (ECM).

4. Can a bad NOx sensor cause drivability issues?

Yes, a malfunctioning NOx sensor can lead to reduced engine efficiency, poor fuel economy, and sluggish acceleration due to incorrect air-fuel mixture adjustments.

5. How do you diagnose code P119A?

Diagnosis typically involves scanning the vehicle for codes, inspecting the NOx sensor and its wiring for damage, checking the sensor's signal output, and testing for exhaust leaks.

6. Is it safe to drive with the P119A code active?

While the vehicle may still be drivable, operating it with this code active could lead to further damage to the emissions system and reduced engine performance over time.

7. How much does it cost to repair code P119A on a 2014 GMC Sierra?

Repair costs can vary depending on the issue, but replacing the NOx sensor typically costs between $200 and $600, including parts and labor.

8. Can I fix code P119A myself?

If you have automotive repair experience, you may be able to replace the NOx sensor or repair damaged wiring. For more complex issues or ECM problems, professional assistance is recommended.

9. Does the P119A code require reprogramming the ECM?

In some cases, after replacing the NOx sensor or repairing the circuit, the ECM may need to be recalibrated or updated to ensure proper functionality.

10. What happens if the P119A code is ignored?

Ignoring the code can lead to increased emissions, reduced fuel efficiency, potential damage to the catalytic converter, and failure to meet regulatory emissions standards.

Discuss the causes and fixes for P119A 2014 GMC Sierra OBDII Code

Submit a New Comment

Code P119A 2014 GMC Sierra comments

No comments found for this page.