P1199 Chrysler Code - Radiator Temp Sensor Input Too Low
Quick Answer
The P1199 Chrysler code indicates that the radiator temperature sensor input is reading lower than the expected value. Common causes include Faulty Radiator Temperature Sensor: The most common cause of this code is a malfunctioning radiator temperature sensor that is providing inaccurate readings to the ECM, Wiring Issues: Damage or corrosion to the wiring connected to the radiator temperature sensor can disrupt the signal being sent to the ECM, ECM Malfunction: A problem with the engine control module itself can also cause incorrect temperature readings from the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1199 Chrysler indicates Radiator Temp Sensor Input Too Low.
- Common causes
- Common causes include Faulty Radiator Temperature Sensor: The most common cause of this code is a malfunctioning radiator temperature sensor that is providing inaccurate readings to the ECM, Wiring Issues: Damage or corrosion to the wiring connected to the radiator temperature sensor can disrupt the signal being sent to the ECM, ECM Malfunction: A problem with the engine control module itself can also cause incorrect temperature readings from the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1199 Chrysler Description
The P1199 Chrysler code indicates that the radiator temperature sensor input is reading lower than the expected value. This sensor is responsible for monitoring the temperature of the engine coolant and providing this information to the engine control module (ECM). The ECM uses this data to adjust the fuel mixture and ignition timing to ensure optimal engine performance and efficiency. When the radiator temperature sensor input is too low, it can lead to incorrect fuel and ignition adjustments, resulting in poor engine performance, decreased fuel efficiency, and potential engine overheating.
Common Causes of P1199 Chrysler
- Faulty Radiator Temperature Sensor: The most common cause of this code is a malfunctioning radiator temperature sensor that is providing inaccurate readings to the ECM.
- Wiring Issues: Damage or corrosion to the wiring connected to the radiator temperature sensor can disrupt the signal being sent to the ECM.
- ECM Malfunction: A problem with the engine control module itself can also cause incorrect temperature readings from the sensor.
- Coolant Level: Low coolant levels can impact the sensor's ability to accurately measure the temperature of the engine coolant.
- Cooling System Problems: Issues with the radiator, thermostat, or water pump can also affect the sensor's readings and trigger this code.
Symptoms of P1199 Chrysler
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Poor Fuel Economy: Incorrect temperature readings can lead to inefficient fuel combustion, resulting in decreased fuel efficiency.
- Engine Overheating: If the sensor inaccurately reads a lower temperature, it may not trigger the cooling system to operate properly, leading to engine overheating.
- Rough Idling: Incorrect fuel and ignition adjustments can cause the engine to idle roughly or inconsistently.
- Reduced Engine Performance: The engine may feel sluggish or lack power under acceleration due to the incorrect sensor readings affecting fuel delivery.
How to Fix P1199 Chrysler
- Diagnostic Check: Begin by using a scan tool to retrieve the specific diagnostic trouble code (DTC) and verify the issue with the radiator temperature sensor input.
- Sensor Replacement: If the sensor is found to be faulty, it will need to be replaced with a new one. The sensor is typically located near the radiator or thermostat housing.
- Wiring Inspection: Check the wiring harness connected to the sensor for any damage, corrosion, or loose connections. Repair or replace any damaged wires as necessary.
- ECM Testing: If the sensor and wiring are in good condition, the engine control module may need to be tested to ensure it is functioning correctly.
- Coolant System Check: Verify that the coolant levels are adequate and inspect the cooling system components for any leaks or malfunctions that could be affecting the sensor's readings.
Cost to Fix P1199 Chrysler
The cost of repairing a P1199 Chrysler code can vary depending on the specific cause of the issue and the labor rates in your area. On average, replacing a faulty radiator temperature sensor can cost between $50 and $150 for the part, with additional labor costs ranging from $100 to $200. If wiring repairs or ECM testing is required, the total repair cost could increase. It is recommended to contact local auto repair shops for accurate pricing based on your vehicle make and model. Remember that diagnostic time and labor rates can also impact the final cost of the repair.
Need more information about the P1199 Chrysler code?
Need more information on how to fix the P1199 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1199 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1199 Chrysler Code
No Frequently Asked Questions about P1199 Chrysler Code found.
Discuss the causes and fixes for P1199 Chrysler OBDII Code
Code P1199 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.