P1197 2015 GMC Sierra Code - Exhaust Gas Temperature Sensor 4 Performance Engine Running
Quick Answer
The P1197 code for a 2015 GMC Sierra indicates a problem with the Exhaust Gas Temperature Sensor 4 Performance while the engine is running. Common causes include Faulty Exhaust Gas Temperature Sensor, Wiring issues or shorts, Damaged sensor connector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1197 2015 GMC Sierra indicates Exhaust Gas Temperature Sensor 4 Performance Engine Running.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor, Wiring issues or shorts, Damaged sensor connector.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1197 2015 GMC Sierra Description
The P1197 code for a 2015 GMC Sierra indicates a problem with the Exhaust Gas Temperature Sensor 4 Performance while the engine is running. This sensor is responsible for monitoring the temperature of the exhaust gases leaving the engine. The data collected by this sensor is crucial for the engine control module to adjust fuel injection and timing to optimize engine performance and reduce emissions.
Common Causes of P1197 2015 GMC Sierra
- Faulty Exhaust Gas Temperature Sensor
- Wiring issues or shorts
- Damaged sensor connector
- Engine control module malfunction
- Exhaust system leaks
Symptoms of P1197 2015 GMC Sierra
- Rough engine running
- Decreased engine power
- Poor fuel efficiency
- Increased emissions
- Check Engine Light illuminated
How to Fix P1197 2015 GMC Sierra
- Begin by diagnosing the specific cause of the issue using a diagnostic scanner to pinpoint the problem area.
- Inspect the Exhaust Gas Temperature Sensor 4 and its wiring for any signs of damage or wear. Replace the sensor if necessary.
- Check the sensor connector for any corrosion or loose connections. Repair or replace as needed.
- Clear the diagnostic trouble codes from the engine control module and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, further diagnostics may be required to identify any underlying issues with the engine control module or exhaust system.
Cost to Fix P1197 2015 GMC Sierra
The typical repair costs for addressing a P1197 code on a 2015 GMC Sierra can vary depending on the specific cause of the issue. In general, replacing the Exhaust Gas Temperature Sensor and addressing any wiring or connector problems can range from $150 to $400 in parts and labor. However, it is important to note that diagnostic time and labor rates at auto repair shops can vary based on location, vehicle make and model, and engine type. It is advisable to check with local shops for a more accurate estimate.
Need more information about the P1197 2015 GMC Sierra code?
Need more information on how to fix the P1197 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1197 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1197 2015 GMC Sierra Code
1. What does the OBDII code P1197 mean on a 2015 GMC Sierra?
P1197 indicates an issue with the Exhaust Gas Temperature (EGT) Sensor 4 performance while the engine is running, meaning the sensor is not providing expected readings.
2. What are the symptoms of code P1197 on a 2015 GMC Sierra?
Common symptoms include the check engine light turning on, reduced engine performance, poor fuel efficiency, and potential issues with the diesel particulate filter (DPF) regeneration process.
3. What causes the P1197 code to appear on a 2015 GMC Sierra?
Possible causes include a faulty EGT Sensor 4, damaged wiring or connections in the EGT sensor circuit, excessive soot buildup on the sensor, or a malfunctioning engine control module (ECM).
4. Can I drive my 2015 GMC Sierra with the P1197 code?
It is not recommended to drive extensively with this code, as it could lead to issues such as improper DPF regeneration, increased emissions, or further engine damage.
5. How do I diagnose the P1197 code on a 2015 GMC Sierra?
Start by inspecting the EGT Sensor 4 and its wiring for damage or loose connections. Use a diagnostic scan tool to monitor sensor readings and compare them to expected values.
6. How is the P1197 code fixed on a 2015 GMC Sierra?
Repairs may include replacing the EGT Sensor 4, repairing damaged wiring or connectors, cleaning soot buildup, or reprogramming/updating the ECM if necessary.
7. How much does it cost to fix the P1197 code on a 2015 GMC Sierra?
The cost depends on the exact cause but typically ranges from $150 to $300 for sensor replacement, including parts and labor.
8. Can a faulty EGT Sensor 4 damage other components?
Yes, if the sensor fails to provide accurate readings, it could prevent proper DPF regeneration, leading to clogging and possibly damaging the exhaust system.
9. How can I prevent the P1197 code from recurring?
Regular maintenance, including cleaning or replacing EGT sensors as needed and ensuring proper DPF operation, can help prevent this code.
10. Will clearing the P1197 code with a scan tool fix the problem?
Clearing the code will temporarily turn off the check engine light, but the underlying issue must be fixed to prevent the code from returning.
Discuss the causes and fixes for P1197 2015 GMC Sierra OBDII Code
Code P1197 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.