P1194 KIA Code - Throttle Actuator Control System Limp Home-Throttle Position Sensor 2 Position Malfunction
Quick Answer
The P1194 diagnostic trouble code for KIA vehicles indicates a Throttle Actuator Control System Limp Home-Throttle Position Sensor 2 Position Malfunction. Common causes include Faulty throttle position sensor 2, Wiring or connector issues, Dirty throttle body. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1194 KIA indicates Throttle Actuator Control System Limp Home-Throttle Position Sensor 2 Position Malfunction.
- Common causes
- Common causes include Faulty throttle position sensor 2, Wiring or connector issues, Dirty throttle body.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1194 KIA Description
The P1194 diagnostic trouble code for KIA vehicles indicates a Throttle Actuator Control System Limp Home-Throttle Position Sensor 2 Position Malfunction. This means that there is an issue with the throttle position sensor 2, which is responsible for sending signals to the engine control unit (ECU) regarding the position of the throttle. The throttle position sensor 2 helps the ECU determine how much air is entering the engine, allowing it to adjust the fuel injection and ignition timing accordingly. When this sensor malfunctions, it can lead to a variety of performance issues and potentially put the vehicle into a "limp home" mode, where the engine operates at reduced power to prevent further damage.
Common Causes of P1194 KIA
- Faulty throttle position sensor 2
- Wiring or connector issues
- Dirty throttle body
- Problems with the throttle actuator control system
- Electronic control unit (ECU) malfunction
Symptoms of P1194 KIA
- Reduced engine power
- Poor fuel efficiency
- Rough idling
- Stalling
- Hesitation during acceleration
How to Fix P1194 KIA
- Begin by performing a thorough diagnostic scan to confirm the P1194 code and identify the specific cause of the issue.
- Inspect the throttle position sensor 2, wiring, and connectors for any signs of damage or wear. Replace any faulty components as needed.
- Clean the throttle body to ensure proper airflow and operation.
- Reset the ECU to clear the code and recalibrate the throttle position sensor 2.
- Test drive the vehicle to verify that the issue has been resolved and that the engine is operating correctly.
Cost to Fix P1194 KIA
The typical repair costs for addressing a Throttle Actuator Control System Limp Home-Throttle Position Sensor 2 Position Malfunction can range from $200 to $500, including parts and labor. However, it is crucial to note that specific diagnosis time and labor rates at auto repair shops can vary significantly based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, with rates potentially higher in metropolitan areas or at dealerships and lower at independent shops. To obtain a more precise estimate, it is recommended to consult local repair shops for accurate pricing information.
Need more information about the P1194 KIA code?
Need more information on how to fix the P1194 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1194 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1194 KIA Code
1. What does the OBDII code P1194 mean for a KIA vehicle?
P1194 indicates a malfunction in the Throttle Actuator Control System, specifically related to the Limp Home mode and Throttle Position Sensor 2.
2. What are the common symptoms of code P1194 in a KIA?
Symptoms may include reduced engine power, poor acceleration, rough idling, and the vehicle entering "Limp Home" mode.
3. What causes the P1194 code in a KIA?
Common causes include a faulty Throttle Position Sensor 2, wiring issues, connector problems, or a malfunctioning throttle actuator.
4. Can driving with code P1194 damage my KIA?
While driving in Limp Home mode may not cause immediate damage, prolonged operation can lead to further throttle system issues and decreased safety.
5. How is code P1194 diagnosed in a KIA?
A mechanic typically uses an OBDII scanner to retrieve the code, performs visual inspections of the throttle system, and tests the sensors and wiring.
6. How do I fix the P1194 code on my KIA?
Repairs may include replacing the Throttle Position Sensor 2, fixing or replacing damaged wiring, cleaning connectors, or recalibrating the throttle system.
7. How much does it cost to repair code P1194 on a KIA?
The repair cost can vary widely, typically ranging from $100 to $500 depending on whether parts like the sensor or throttle actuator need replacement.
8. Can a dirty throttle body cause code P1194 on a KIA?
Yes, a dirty throttle body can impact sensor readings and actuator performance, potentially triggering this code.
9. Does code P1194 require a throttle system reset after repairs?
Yes, in many cases, a reset or recalibration of the throttle system may be necessary to clear the code and restore normal operation.
10. What tools are needed to repair code P1194 on a KIA?
Basic tools include an OBDII scanner, multimeter for electrical tests, and appropriate screwdrivers or wrenches for sensor replacement.
Discuss the causes and fixes for P1194 KIA OBDII Code
Code P1194 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.