P1194 2014 GMC Sierra Code - O2 Low Reference Circuit High Voltage (NOx Sensor 1)
Quick Answer
The P1194 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the O2 Low Reference Circuit High Voltage, specifically related to the NOx Sensor 1. Common causes include Faulty NOx Sensor: The NOx sensor itself may be malfunctioning, leading to incorrect voltage readings in the low reference circuit, Wiring Issues: Damage or corrosion in the wiring connected to the NOx sensor can cause a disruption in the circuit, triggering the code, ECM Malfunction: Problems with the engine control module (ECM) can interfere with the proper functioning of the NOx sensor and lead to voltage irregularities. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1194 2014 GMC Sierra indicates O2 Low Reference Circuit High Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx Sensor: The NOx sensor itself may be malfunctioning, leading to incorrect voltage readings in the low reference circuit, Wiring Issues: Damage or corrosion in the wiring connected to the NOx sensor can cause a disruption in the circuit, triggering the code, ECM Malfunction: Problems with the engine control module (ECM) can interfere with the proper functioning of the NOx sensor and lead to voltage irregularities.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1194 2014 GMC Sierra Description
The P1194 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the O2 Low Reference Circuit High Voltage, specifically related to the NOx Sensor 1. This code suggests that the oxygen sensor (O2 sensor) responsible for monitoring the exhaust gases in the vehicle's emissions system is detecting a higher voltage than expected in the low reference circuit. The NOx sensor is crucial for measuring the levels of nitrogen oxide (NOx) in the exhaust gases, which is essential for emissions control and compliance with environmental regulations.
Common Causes of P1194 2014 GMC Sierra
- Faulty NOx Sensor: The NOx sensor itself may be malfunctioning, leading to incorrect voltage readings in the low reference circuit.
- Wiring Issues: Damage or corrosion in the wiring connected to the NOx sensor can cause a disruption in the circuit, triggering the code.
- ECM Malfunction: Problems with the engine control module (ECM) can interfere with the proper functioning of the NOx sensor and lead to voltage irregularities.
- Exhaust System Problems: Issues with the exhaust system, such as leaks or blockages, can impact the readings from the NOx sensor and trigger the code.
Symptoms of P1194 2014 GMC Sierra
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Fuel Efficiency: The vehicle may experience decreased fuel efficiency due to improper readings from the NOx sensor.
- Rough Idle: The engine may run rough or have difficulty idling smoothly, indicating a potential issue with the emissions system.
- Increased Emissions: Higher levels of emissions may be detected during emissions testing or visible from the vehicle's exhaust.
How to Fix P1194 2014 GMC Sierra
- Diagnostic Testing: Begin by using a diagnostic scanner to retrieve the specific DTC and pinpoint the issue with the O2 Low Reference Circuit High Voltage.
- Inspect Wiring: Check the wiring connected to the NOx sensor for any damage, corrosion, or loose connections. Repair or replace as needed.
- Test NOx Sensor: Test the NOx sensor itself to determine if it is functioning correctly. Replace the sensor if it is found to be faulty.
- Check ECM: Inspect the engine control module (ECM) for any signs of malfunction or damage. Repair or replace as necessary.
- Clear Codes: After completing the repairs, clear the DTC from the vehicle's computer using the diagnostic scanner to reset the check engine light.
Cost to Fix P1194 2014 GMC Sierra
The typical repair costs for addressing the P1194 code on a 2014 GMC Sierra can vary depending on the specific cause of the issue. On average, the parts required for this repair, such as a new NOx sensor or wiring components, can range from $100 to $300. Labor costs at an auto repair shop can add an additional $100 to $200, bringing the total estimate to approximately $200 to $500.
Need more information about the P1194 2014 GMC Sierra code?
Need more information on how to fix the P1194 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1194 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1194 2014 GMC Sierra Code
1. What does the OBDII code P1194 mean on a 2014 GMC Sierra?
P1194 indicates an issue with the O2 Low Reference Circuit High Voltage for NOx Sensor 1. This means the sensor is detecting an abnormally high voltage in the low reference circuit.
2. What are the common symptoms of code P1194 in a 2014 GMC Sierra?
Symptoms can include the Check Engine Light turning on, reduced fuel efficiency, rough idling, poor engine performance, and potential difficulty passing emissions tests.
3. What causes the P1194 code in a 2014 GMC Sierra?
Common causes include a faulty NOx sensor, damaged wiring or connectors in the low reference circuit, corrosion on electrical components, or a problem with the engine control module (ECM).
4. Can I drive my 2014 GMC Sierra with the P1194 code?
While the vehicle may still be drivable, ignoring the code can lead to decreased fuel efficiency, increased emissions, and potential damage to other engine components over time.
5. How do you diagnose the P1194 code in a 2014 GMC Sierra?
A technician will typically use a scan tool to read live data, inspect the wiring and connectors for damage, check for proper ground connections, and test the NOx sensor's functionality.
6. How is the P1194 code fixed on a 2014 GMC Sierra?
Repairs may involve replacing the faulty NOx sensor, repairing or replacing damaged wiring or connectors, cleaning corroded connections, or reprogramming or replacing the ECM if necessary.
7. How much does it cost to fix the P1194 code on a 2014 GMC Sierra?
The cost depends on the specific issue but typically ranges from $200 to $600, with NOx sensor replacement being the most common expense.
8. Can a bad NOx sensor cause the P1194 code?
Yes, a faulty NOx sensor is one of the most common causes of the P1194 code as it directly monitors and reports voltage levels in the low reference circuit.
9. What happens if the P1194 code is not fixed on a 2014 GMC Sierra?
If unresolved, the P1194 code can lead to long-term engine performance issues, higher emissions, and possible damage to the exhaust system or catalytic converter.
10. Can I clear the P1194 code without repairing the issue on my 2014 GMC Sierra?
While clearing the code with a scan tool may temporarily turn off the Check Engine Light, the issue is likely to return if the underlying problem is not addressed.
Discuss the causes and fixes for P1194 2014 GMC Sierra OBDII Code
Code P1194 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.