P1194 2014 Chevrolet Silverado Code - O2 Low Reference Circuit High Voltage (NOx Sensor 1)
Quick Answer
The P1194 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates an issue with the O2 low reference circuit high voltage, specifically related to the NOx sensor 1. Common causes include Faulty NOx sensor, Wiring or connector issues in the O2 low reference circuit, ECM software malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1194 2014 Chevrolet Silverado indicates O2 Low Reference Circuit High Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx sensor, Wiring or connector issues in the O2 low reference circuit, ECM software malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1194 2014 Chevrolet Silverado Description
The P1194 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates an issue with the O2 low reference circuit high voltage, specifically related to the NOx sensor 1. The NOx sensor is responsible for monitoring the levels of nitrogen oxide in the exhaust gases and providing feedback to the engine control module (ECM) to adjust fuel mixture and emission levels. The O2 low reference circuit high voltage error suggests that there is a problem with the reference voltage being supplied to the sensor, leading to inaccurate readings and potential performance issues.
Common Causes of P1194 2014 Chevrolet Silverado
- Faulty NOx sensor
- Wiring or connector issues in the O2 low reference circuit
- ECM software malfunction
- Exhaust system leaks
- Contaminated exhaust gases affecting sensor readings
Symptoms of P1194 2014 Chevrolet Silverado
- Decreased fuel efficiency
- Engine misfires or hesitation
- Illumination of the check engine light
- Failed emissions test
- Rough idling or stalling
How to Fix P1194 2014 Chevrolet Silverado
- Diagnose the issue by using a scan tool to read the DTC and perform a thorough inspection of the NOx sensor and related components.
- Check the wiring and connectors for any signs of damage or corrosion, repairing or replacing as necessary.
- Test the NOx sensor's functionality using a multimeter to ensure it is providing accurate readings.
- Clear the DTC from the ECM memory and reset the system to see if the code reappears after repairs.
- Perform a test drive to verify that the issue has been resolved and that the vehicle's performance has returned to normal.
Cost to Fix P1194 2014 Chevrolet Silverado
The typical repair costs for addressing a P1194 code on a 2014 Chevrolet Silverado can vary depending on the specific cause of the issue. In general, replacing a faulty NOx sensor can cost between $200 and $500, while addressing wiring or connector issues may range from $100 to $300. Labor costs can add an additional $80 to $150 per hour, and the total repair bill could amount to $300 to $800 or more. It's important to consult with a qualified mechanic or dealership for an accurate estimate based on the specific circumstances of your vehicle.
Need more information about the P1194 2014 Chevrolet Silverado code?
Need more information on how to fix the P1194 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1194 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1194 2014 Chevrolet Silverado Code
What does the OBDII code P1194 mean for a 2014 Chevrolet Silverado?
Code P1194 indicates an issue with the "O2 Low Reference Circuit High Voltage" related to NOx Sensor 1, which monitors nitrogen oxide levels in the exhaust system.
What are common symptoms of code P1194 in a 2014 Chevrolet Silverado?
Symptoms include an illuminated check engine light, reduced fuel efficiency, poor engine performance, and potentially increased emissions.
What causes the P1194 code to appear?
Common causes include a faulty NOx sensor 1, damaged wiring or connectors in the O2 low reference circuit, or excessive voltage in the circuit due to electrical issues.
Can a faulty NOx sensor trigger the P1194 code?
Yes, a malfunctioning NOx sensor 1 can cause this code by sending incorrect voltage signals to the vehicle's computer.
How can I diagnose the P1194 code?
Start by visually inspecting the NOx sensor and its wiring for damage or corrosion. Use a scan tool to monitor sensor readings and check for proper voltage levels in the O2 low reference circuit.
Is the P1194 code serious?
While your vehicle may still run, this code can result in higher emissions and reduced engine performance. Addressing it promptly is recommended to avoid further damage.
Can the P1194 code affect fuel economy?
Yes, unresolved issues with the NOx sensor can lead to inefficient combustion, reducing fuel economy.
How do you fix the P1194 code?
Repairs may involve replacing the NOx sensor 1, repairing or replacing damaged wiring, or addressing voltage irregularities in the low reference circuit.
Can the P1194 code be caused by a software issue?
While rare, outdated or corrupted engine control module (ECM) software can occasionally contribute to this code. A software update might resolve the issue.
Should I clear the P1194 code after repairs?
Yes, once repairs are complete, clear the code using a scan tool and test drive the vehicle to ensure the issue does not return.
Discuss the causes and fixes for P1194 2014 Chevrolet Silverado OBDII Code
Code P1194 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.