P1192 2014 GMC Sierra Code - O2 Low Reference Circuit (NOx Sensor 1)
Quick Answer
The P1192 code for a 2014 GMC Sierra specifically refers to an issue with the O2 Low Reference Circuit related to the NOx Sensor 1. Common causes include Faulty O2 Low Reference Circuit, Wiring or connection issues in the circuit, Corrosion or damage to the NOx sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1192 2014 GMC Sierra indicates O2 Low Reference Circuit (NOx Sensor 1).
- Common causes
- Common causes include Faulty O2 Low Reference Circuit, Wiring or connection issues in the circuit, Corrosion or damage to the NOx sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1192 2014 GMC Sierra Description
The P1192 code for a 2014 GMC Sierra specifically refers to an issue with the O2 Low Reference Circuit related to the NOx Sensor 1. The NOx sensor plays a crucial role in monitoring the levels of nitrogen oxide in the exhaust gases of the vehicle. The O2 Low Reference Circuit is responsible for providing a stable voltage reference for the NOx sensor to accurately measure the nitrogen oxide levels. When this circuit malfunctions or provides a low voltage reference, it can lead to inaccurate readings from the NOx sensor, potentially causing the vehicle to run inefficiently and produce higher emissions.
Common Causes of P1192 2014 GMC Sierra
- Faulty O2 Low Reference Circuit
- Wiring or connection issues in the circuit
- Corrosion or damage to the NOx sensor
- Issues with the engine control module (ECM)
- Exhaust system leaks or damage
Symptoms of P1192 2014 GMC Sierra
- Decreased fuel efficiency
- Engine misfires or hesitation
- Illuminated check engine light
- Increased emissions output
- Rough idling or stalling
How to Fix P1192 2014 GMC Sierra
- Begin by conducting a thorough inspection of the O2 Low Reference Circuit and the NOx sensor to identify any visible damage or corrosion.
- Check the wiring and connections related to the circuit for any loose connections or breaks. Repair or replace any damaged wiring.
- Test the NOx sensor to ensure it is functioning properly. Replace the sensor if necessary.
- Clear the diagnostic trouble codes from the vehicle's ECM using a scan tool.
- After completing the repairs, test drive the vehicle to ensure the issue has been resolved and the check engine light does not reappear.
Cost to Fix P1192 2014 GMC Sierra
The typical repair costs for addressing a P1192 code related to the O2 Low Reference Circuit in a 2014 GMC Sierra can range from $200 to $500, including parts and labor. However, it is important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check local rates for a more precise estimate.
Need more information about the P1192 2014 GMC Sierra code?
Need more information on how to fix the P1192 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1192 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1192 2014 GMC Sierra Code
1. What does the OBDII code P1192 mean on a 2014 GMC Sierra?
P1192 indicates an issue with the O2 low reference circuit for NOx Sensor 1, typically related to the sensor's ability to communicate accurate readings to the engine control module (ECM).
2. What are the common symptoms of code P1192 in a 2014 GMC Sierra?
Symptoms may include reduced engine performance, increased emissions, poor fuel economy, and an illuminated check engine light.
3. What causes the P1192 code to appear on a 2014 GMC Sierra?
Common causes include a faulty NOx sensor, damaged wiring or connectors in the sensor circuit, or issues with the ECM.
4. Can a bad NOx sensor trigger the P1192 code?
Yes, a malfunctioning NOx sensor is a common cause of this code, as it may fail to send proper signals to the ECM.
5. How do I diagnose the P1192 code on my GMC Sierra?
Start by inspecting the wiring and connectors for damage or corrosion, then test the NOx sensor for functionality, and finally, check the ECM for possible faults.
6. Can I drive my 2014 GMC Sierra with the P1192 code active?
Driving with this code is not recommended, as it can lead to poor engine performance and increased emissions, potentially causing further damage.
7. How do I fix the P1192 code on a 2014 GMC Sierra?
Repairs may include replacing the NOx sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary.
8. How much does it cost to fix the P1192 code on a GMC Sierra?
The repair cost varies but typically ranges from $200 to $600, depending on whether the NOx sensor or other components need replacement.
9. Can a software update resolve the P1192 code?
In some cases, a software update for the ECM may resolve the issue if the problem is related to calibration or programming.
10. Is the P1192 code related to emissions testing?
Yes, the P1192 code can cause your vehicle to fail an emissions test due to increased pollutant output from improper NOx sensor function.
Discuss the causes and fixes for P1192 2014 GMC Sierra OBDII Code
Code P1192 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.