P118E Code - Exhaust Gas Temperature Sensor 1 Performance Engine Running
Quick Answer
The P118E code indicates a problem with the Exhaust Gas Temperature (EGT) Sensor 1 performance while the engine is running. Common causes include Faulty EGT Sensor 1, Wiring or connector issues, Exhaust leaks near the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P118E indicates Exhaust Gas Temperature Sensor 1 Performance Engine Running.
- Common causes
- Common causes include Faulty EGT Sensor 1, Wiring or connector issues, Exhaust leaks near the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P118E Description
The P118E code indicates a problem with the Exhaust Gas Temperature (EGT) Sensor 1 performance while the engine is running. This sensor is responsible for monitoring the temperature of the exhaust gases leaving the engine. The information gathered by the EGT sensor is crucial for the engine control module to adjust fuel delivery and optimize engine performance. When this sensor fails or malfunctions, it can lead to a variety of issues that can affect the vehicle's performance and emissions.
Common Causes of P118E
- Faulty EGT Sensor 1
- Wiring or connector issues
- Exhaust leaks near the sensor
- Carbon buildup on the sensor
- Engine overheating
Symptoms of P118E
- Check engine light illuminated
- Decreased fuel economy
- Reduced engine power
- Increased emissions
- Rough idling or engine misfires
How to Fix P118E
- Diagnose the issue by using a scan tool to read the code and test the EGT Sensor 1 for proper operation.
- Inspect the wiring and connectors for any damage or corrosion and repair or replace as needed.
- Check for exhaust leaks near the sensor and repair any leaks found.
- Clean the EGT Sensor 1 to remove any carbon buildup that may be affecting its performance.
- If the sensor is found to be faulty, replace it with a new one and reset the check engine light.
Cost to Fix P118E
The typical repair costs for addressing a P118E code can vary depending on the specific cause of the issue. Generally, the cost of a new EGT Sensor 1 can range from $50 to $200, depending on the vehicle make and model. Labor costs for this repair can range from $100 to $300, with total repair costs typically falling between $150 and $500. It is recommended to consult with a professional mechanic to get an accurate estimate based on your vehicle's specific needs and local labor rates.
Need more information about the P118E code?
Need more information on how to fix the P118E code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P118E code diagnosed by a professional: Find a repair shop in your area
Code P118E Information for Specific Makes
- P118E Buick — Exhaust Gas Temperature Sensor 1 Performance Engine Running
- P118E Cadillac — Exhaust Gas Temperature Sensor 1 Performance Engine Running
- P118E Chevrolet — Exhaust Gas Temperature Sensor 1 Performance Engine Running
- P118E GMC — Exhaust Gas Temperature Sensor 1 Performance Engine Running
Frequently Asked Questions about P118E Code
1. What are common symptoms of OBDII code P118E?
- Common symptoms of code P118E may include reduced engine performance, increased fuel consumption, and the illumination of the check engine light.
2. What can cause OBDII code P118E to be triggered?
- Code P118E is typically triggered by a faulty exhaust gas temperature sensor 1, wiring issues, or problems with the sensor's circuit.
3. How can I diagnose the cause of OBDII code P118E?
- To diagnose the cause of code P118E, you can conduct a visual inspection of the sensor and its wiring, perform electrical tests on the sensor, and use a scan tool to monitor sensor data.
4. Is it safe to continue driving with OBDII code P118E present?
- It is not recommended to continue driving with code P118E active, as it can lead to further damage to the engine and emissions system. It is best to address the issue promptly.
5. How can I repair OBDII code P118E?
- Repairing code P118E involves replacing the faulty exhaust gas temperature sensor 1, repairing any damaged wiring or connectors, and clearing the code with a scan tool.
6. Can I reset OBDII code P118E without fixing the underlying issue?
- While you can clear the code temporarily, it will likely reappear if the underlying issue is not addressed. It is important to fix the root cause of the problem to prevent code recurrence.
7. Are there any tips for preventing OBDII code P118E from reoccurring?
- To prevent code P118E from reoccurring, ensure regular maintenance of the exhaust gas temperature sensor, keep an eye on the vehicle's overall health, and address any engine performance issues promptly.
8. How long does it typically take to repair OBDII code P118E?
- The repair time for code P118E can vary depending on the extent of the issue and the availability of parts. In general, the repair can take anywhere from 1 to 3 hours.
9. Can a DIY enthusiast fix OBDII code P118E at home?
- If you have the necessary tools, skills, and knowledge, you may be able to fix code P118E at home. However, if you are unsure, it is best to seek assistance from a professional mechanic.
10. Will fixing OBDII code P118E improve my vehicle's performance?
- Yes, addressing and repairing code P118E can lead to improved engine performance, better fuel efficiency, and overall smoother operation of the vehicle.
Discuss the causes and fixes for P118E OBDII Code
Code P118E comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.