Engine-Codes
 
OBDII Code List
 
P1189 HYUNDAI

P1189 HYUNDAI - Fuel Pressure Monitoring - Governor Deviation at Engine speed Too high

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What does this mean?

P1189 HYUNDAI Possible Causes

  • Faulty Fuel filter
  • Faulty Injector
  • Faulty Electric fuel pump
  • Faulty Fuel Pressure Regulator (FPR)
  • Faulty Rail Pressure Sensor (RPS)
  • Engine Control Module (ECM)

How do I fix code P1189 HYUNDAI

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1189 HYUNDAI code

    Labor: 1.0

    The cost of diagnosing the P1189 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

P1189 HYUNDAI Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1189 HYUNDAI Meaning

Fuel pressure monitoring is used to detect the troubles and the fuel leakage in high pressure system.
The Engine Control Module (ECM) determines the rail pressure value as a function of the engine’s operating conditions and controls the fuel pressure regulator to ensure that the rail pressure reaches the required value.
Fuel pressure in the fuel line including the pumps and injector are continuously monitored during engine running.
If the rail pressure is excessive, the fuel pressure regulator opens and a portion of the fuel is returned from the rail to the fuel tank via a collector line. If the rail pressure is too low, the fuel pressure regulator closes.
The fuel pressure regulator closes. the fuel pressure regulator is installed in the tail end of high pressure accumulator.
In case of the insufficient fuel supply in the fuel line, the engine symptoms will occur a shut down and a starting impossible.
If the fuel pressure monitoring in engine fuel pressure line generates threshold value, the ECM judged this as a fault and the P1189 code is set.
OBDII Code P1189 HYUNDAI - Fuel Pressure Monitoring - Governor Deviation at Engine speed Too high - Engine-Codes.com

P1189 HYUNDAI More Information

Need more information on how to fix the P1189 HYUNDAI code?
Get Access to Factory Service Manuals

Related Information