P1180 HYUNDAI - Fuel Pressure Regulator Malfunction
P1180 HYUNDAI Possible Causes
- Faulty Fuel Pressure Regulator (FPR)
- Fuel Pressure Regulator (FPR) harness is open or shorted
- Fuel Pressure Regulator (FPR) circuit poor electrical connection
- Faulty Fuel Injector
- Faulty Engine Control Module (ECM)
How is the P1180 HYUNDAI code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the P1180 HYUNDAI code
Labor: 1.0The cost to diagnose the P1180 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
- Engine Light ON (or Service Engine Soon Warning Light)
P1180 HYUNDAI MeaningThe Fuel Pressure Regulator (FPR) sets the correct pressure in the rail as a function of engine, loading, and maintains it at this level. If the rail pressure is excessive, the pressure control valve opens and a portion of the fuel returns from the rail to the fuel tank via a collector line. If the rail pressure is too low, the pressure control valve closes and seals off the high-pressure stage from the low-pressure stage. In case of the fuel pressure regulator failure, the engine symptoms will occur the shutdown and the starting impossible. The Diagnostic Trouble Code (DTC) will set if the fuel rail pressure is short circuit to battery line or open circuit during two driving cycles or if the engine speed is not below 500 rpm within 1.5 sec. after the ignition switch OFF, during driving cycles.
More InformationNeed more information on how to fix the P1180 HYUNDAI code?
Get Access to Factory Service Manuals