P116D 2015 Chevrolet Silverado Code - O2 Pump Current Control Circuit (NOx Sensor 1)
Quick Answer
The P116D code on a 2015 Chevrolet Silverado indicates a problem with the O2 pump current control circuit related to NOx Sensor 1. Common causes include Faulty NOx sensor, Wiring issues in the O2 pump current control circuit, Malfunctioning engine control module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116D 2015 Chevrolet Silverado indicates O2 Pump Current Control Circuit (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx sensor, Wiring issues in the O2 pump current control circuit, Malfunctioning engine control module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116D 2015 Chevrolet Silverado Description
The P116D code on a 2015 Chevrolet Silverado indicates a problem with the O2 pump current control circuit related to NOx Sensor 1. This code specifically points to an issue with the oxygen sensor pump that controls the current in the circuit for the nitrogen oxide (NOx) sensor. The NOx sensor is responsible for monitoring the levels of nitrogen oxide in the exhaust gases to ensure compliance with emissions regulations.
Common Causes of P116D 2015 Chevrolet Silverado
- Faulty NOx sensor
- Wiring issues in the O2 pump current control circuit
- Malfunctioning engine control module (ECM)
- Corrosion or damage to sensor connectors
- Exhaust leaks near the sensor
Symptoms of P116D 2015 Chevrolet Silverado
- Decreased fuel efficiency
- Increased emissions output
- Engine misfires or rough idling
- Check Engine Light illuminated
- Reduced engine performance
How to Fix P116D 2015 Chevrolet Silverado
- Diagnose the issue by using a scan tool to retrieve the specific fault code and inspecting the NOx sensor and related components.
- Check the wiring and connectors for any signs of damage or corrosion, repairing or replacing as necessary.
- Test the NOx sensor and O2 pump current control circuit to ensure they are functioning properly.
- If the NOx sensor is faulty, replace it with a new sensor that meets OEM specifications.
- Clear the fault code and perform a test drive to verify that the issue has been resolved.
Cost to Fix P116D 2015 Chevrolet Silverado
The typical repair costs for addressing a P116D code on a 2015 Chevrolet Silverado can range from $200 to $500, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's advisable to check local rates for a more precise estimate. Keep in mind that rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less.
Need more information about the P116D 2015 Chevrolet Silverado code?
Need more information on how to fix the P116D 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116D 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P116D 2015 Chevrolet Silverado Code
1. What does the OBDII code P116D mean on a 2015 Chevrolet Silverado?
P116D indicates an issue with the O2 Pump Current Control Circuit in NOx Sensor 1, which monitors and regulates the nitrogen oxide levels emitted by the engine.
2. What are the symptoms of a P116D code in a 2015 Chevrolet Silverado?
Symptoms may include reduced fuel efficiency, illuminated check engine light, rough idling, poor engine performance, or increased emissions.
3. What causes the P116D code in a 2015 Chevrolet Silverado?
Common causes include a faulty NOx sensor, damaged wiring or connectors in the O2 pump circuit, or issues with the engine control module (ECM).
4. How do you diagnose a P116D code on a 2015 Chevrolet Silverado?
Diagnosing involves scanning with an OBDII tool, checking the NOx sensor and wiring for damage, and testing the O2 pump circuit for proper voltage and resistance.
5. Can a bad NOx sensor trigger the P116D code?
Yes, a faulty NOx sensor is one of the most common reasons for this code.
6. Can you drive with a P116D code on a 2015 Chevrolet Silverado?
Driving with this code is not recommended as it can lead to increased emissions, reduced performance, and potential damage to the catalytic converter.
7. How is a P116D code typically fixed on a 2015 Chevrolet Silverado?
Repairs typically involve replacing the NOx sensor, repairing damaged wiring or connectors, or reprogramming/updating the ECM.
8. How much does it cost to fix a P116D code on a 2015 Chevrolet Silverado?
The cost can vary, but replacing a NOx sensor typically ranges from $300 to $700, including parts and labor.
9. Is a software update required to fix the P116D code?
In some cases, an ECM software update may be needed to resolve the issue, especially if the problem persists after sensor replacement.
10. What tools are needed to troubleshoot the P116D code?
You’ll need an OBDII scanner, a multimeter for circuit testing, and possibly a diagnostic flowchart specific to the 2015 Chevrolet Silverado.
Discuss the causes and fixes for P116D 2015 Chevrolet Silverado OBDII Code
Code P116D 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.