P116D 2014 Chevrolet Silverado Code - O2 Pump Current Control Circuit (NOx Sensor 1)
Quick Answer
The P116D diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado relates to the O2 pump current control circuit associated with the NOx sensor 1. Common causes include Faulty O2 pump current control circuit, Damaged wiring or connectors, Malfunctioning NOx sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116D 2014 Chevrolet Silverado indicates O2 Pump Current Control Circuit (NOx Sensor 1).
- Common causes
- Common causes include Faulty O2 pump current control circuit, Damaged wiring or connectors, Malfunctioning NOx sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116D 2014 Chevrolet Silverado Description
The P116D diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado relates to the O2 pump current control circuit associated with the NOx sensor 1. This code indicates that there is a malfunction in the control circuit that manages the current flowing to the O2 pump in the vehicle's exhaust system, specifically for the first NOx sensor. The NOx sensor is responsible for monitoring the levels of nitrogen oxide (NOx) emissions in the exhaust gases to ensure compliance with emissions regulations.
Common Causes of P116D 2014 Chevrolet Silverado
- Faulty O2 pump current control circuit
- Damaged wiring or connectors
- Malfunctioning NOx sensor
- Issues with the engine control module (ECM)
- Defective O2 pump
Symptoms of P116D 2014 Chevrolet Silverado
- Decreased fuel efficiency
- Engine misfires or rough idling
- Illuminated check engine light
- Reduced engine power
- Increased emissions output
How to Fix P116D 2014 Chevrolet Silverado
- Diagnose the specific cause of the P116D code by using a scan tool to retrieve the fault codes and inspecting the O2 pump current control circuit, NOx sensor, wiring, and connectors.
- Replace the faulty component, whether it be the O2 pump current control circuit, NOx sensor, wiring, connectors, or ECM.
- Clear the fault codes and reset the engine control module to see if the issue has been resolved.
- Perform a test drive to verify that the symptoms associated with the P116D code have been eliminated.
- Conduct emission testing to ensure that the vehicle is now compliant with emissions regulations.
Cost to Fix P116D 2014 Chevrolet Silverado
The repair costs for addressing the P116D code on a 2014 Chevrolet Silverado can vary depending on the specific cause of the issue and the cost of parts and labor. On average, the repair for this type of problem can range from $200 to $500, including parts and labor. However, it is important to note that diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check with local repair shops for a more accurate estimate. Labor rates typically range between $80 and $150 per hour, with rates potentially higher in metropolitan areas or at dealerships and lower at independent shops.
Need more information about the P116D 2014 Chevrolet Silverado code?
Need more information on how to fix the P116D 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116D 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P116D 2014 Chevrolet Silverado Code
1. What does the OBDII code P116D mean on a 2014 Chevrolet Silverado?
P116D refers to an issue with the O2 Pump Current Control Circuit for NOx Sensor 1, indicating a malfunction in how the sensor controls oxygen pump current.
2. What are the common symptoms of code P116D in a 2014 Chevrolet Silverado?
Symptoms may include the check engine light turning on, reduced fuel efficiency, poor engine performance, or difficulty passing emissions tests.
3. What causes the P116D code to appear on a 2014 Chevrolet Silverado?
Common causes include a faulty NOx sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).
4. Can a faulty NOx sensor trigger the P116D code?
Yes, a malfunctioning NOx sensor is one of the primary causes of the P116D code.
5. How do I diagnose the P116D code on my 2014 Chevrolet Silverado?
Start by inspecting the wiring and connectors to the NOx sensor for damage or corrosion, then test the sensor’s operation using a diagnostic scanner and multimeter.
6. Can I drive with a P116D code active on my 2014 Chevrolet Silverado?
It is possible to drive short distances, but prolonged driving with this code may lead to reduced fuel efficiency, increased emissions, or potential damage to the catalytic converter.
7. How is the P116D code fixed on a 2014 Chevrolet Silverado?
Repairs typically involve replacing the faulty NOx sensor, repairing or replacing damaged wiring, or reprogramming/updating the ECM if needed.
8. What tools are needed to troubleshoot the P116D code?
A diagnostic scanner, multimeter, and possibly a wiring diagram for the NOx sensor circuit are necessary for effective troubleshooting.
9. How much does it cost to fix the P116D code on a 2014 Chevrolet Silverado?
Repair costs vary but often include around $300-$700 for parts and labor when replacing the NOx sensor or addressing wiring issues.
10. Can a software update resolve the P116D code on a 2014 Chevrolet Silverado?
In some cases, an ECM software update from the dealership may resolve the issue if it’s related to programming errors.
Discuss the causes and fixes for P116D 2014 Chevrolet Silverado OBDII Code
Code P116D 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.