P116B 2017 Chevrolet Silverado Code - O2 Signal Circuit Low Voltage (NOx Sensor 1)
Quick Answer
The P116B diagnostic trouble code (DTC) indicates that the Engine Control Module (ECM) has detected a low voltage signal from the NOx (Nitrogen Oxide) sensor 1, which is responsible for monitoring the levels of nitrogen oxides in the exhaust gases. Common causes include Faulty NOx Sensor: The most common cause is a defective NOx sensor that is unable to provide accurate readings, Wiring Issues: Damaged, frayed, or corroded wiring in the sensor circuit can lead to low voltage signals, ECM Malfunction: A failure in the engine control module can misinterpret sensor data or fail to process it correctly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116B 2017 Chevrolet Silverado indicates O2 Signal Circuit Low Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx Sensor: The most common cause is a defective NOx sensor that is unable to provide accurate readings, Wiring Issues: Damaged, frayed, or corroded wiring in the sensor circuit can lead to low voltage signals, ECM Malfunction: A failure in the engine control module can misinterpret sensor data or fail to process it correctly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116B 2017 Chevrolet Silverado Description
The P116B diagnostic trouble code (DTC) indicates that the Engine Control Module (ECM) has detected a low voltage signal from the NOx (Nitrogen Oxide) sensor 1, which is responsible for monitoring the levels of nitrogen oxides in the exhaust gases. This sensor plays a crucial role in the vehicle's emissions control system, particularly in diesel engines where NOx emissions are a significant concern. The low voltage signal suggests that the sensor is either malfunctioning, there is a wiring issue, or there is a problem with the ECM's ability to interpret the sensor's output.
Common Causes of P116B 2017 Chevrolet Silverado
- Faulty NOx Sensor: The most common cause is a defective NOx sensor that is unable to provide accurate readings.
- Wiring Issues: Damaged, frayed, or corroded wiring in the sensor circuit can lead to low voltage signals.
- ECM Malfunction: A failure in the engine control module can misinterpret sensor data or fail to process it correctly.
- Exhaust System Leaks: Leaks in the exhaust system can introduce fresh air, skewing the sensor's readings and causing low voltage.
- Contamination: Build-up of soot or other contaminants on the sensor can impair its function, leading to erroneous signals.
Symptoms of P116B 2017 Chevrolet Silverado
- Check Engine Light: The most immediate symptom is the illumination of the check engine light on the dashboard.
- Reduced Engine Performance: Drivers may notice a lack of power during acceleration or difficulty maintaining speed.
- Increased Fuel Consumption: A malfunctioning NOx sensor can lead to poor fuel economy as the engine struggles to optimize the air-fuel mixture.
- Rough Idle: The engine may exhibit a rough or unstable idle, indicating issues with fuel delivery or combustion.
- Failed Emissions Test: The vehicle may fail emissions testing due to elevated NOx levels, leading to potential fines or the need for repairs before re-testing.
How to Fix P116B 2017 Chevrolet Silverado
- Diagnostic Scan: Begin with a thorough diagnostic scan to confirm the P116B code and check for any additional codes that may provide further insight.
- Visual Inspection: Conduct a visual inspection of the NOx sensor and its wiring harness for signs of damage, corrosion, or loose connections.
- Sensor Replacement: If the sensor is deemed faulty, replace it with a new, OEM-quality NOx sensor to ensure proper functionality.
- Wiring Repair: If wiring issues are found, repair or replace damaged wires and ensure all connections are secure and free of corrosion.
- ECM Reprogramming: In some cases, it may be necessary to reprogram or update the ECM to ensure it correctly interprets signals from the new sensor.
Cost to Fix P116B 2017 Chevrolet Silverado
** The cost to repair a P116B code can vary significantly based on the specific issue identified during diagnostics. On average, the cost for parts and labor can range from $200 to $800. A new NOx sensor typically costs between $100 and $300, while labor costs can range from $80 to $150 per hour, depending on the shop's location and reputation. It's important to note that metropolitan areas or dealerships may charge higher rates, while independent shops may offer more competitive pricing. Always consult local repair shops for a more precise estimate tailored to your vehicle's specific needs and the local market conditions.
Need more information about the P116B 2017 Chevrolet Silverado code?
Need more information on how to fix the P116B 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116B 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P116B 2017 Chevrolet Silverado Code
What does the OBDII code P116B mean in a 2017 Chevrolet Silverado?
The P116B code indicates a problem with the O2 signal circuit for NOx Sensor 1, where the voltage is lower than expected.
What are the common symptoms of code P116B in a Chevrolet Silverado?
Symptoms can include the check engine light turning on, decreased fuel efficiency, poor engine performance, or issues with emissions compliance.
What causes the P116B code to appear in a 2017 Silverado?
Common causes include a faulty NOx sensor, damaged wiring or connectors in the O2 signal circuit, or issues with the vehicle's engine control module (ECM).
Can a bad NOx sensor cause the P116B code?
Yes, a malfunctioning NOx sensor is one of the primary causes of the P116B code.
How do I diagnose the P116B code in my 2017 Chevrolet Silverado?
Start by inspecting the wiring and connectors for damage, test the NOx sensor, and use a scan tool to monitor live data from the sensor to confirm if it's functioning properly.
Can driving with the P116B code damage my Silverado?
While you may still be able to drive, ignoring the code can lead to reduced engine performance, increased emissions, and potential damage to the catalytic converter over time.
How do I fix the P116B code in a 2017 Silverado?
Repairs may include replacing a faulty NOx sensor, repairing damaged wiring or connectors, or updating/reprogramming the ECM if necessary.
How much does it cost to repair the P116B code in a 2017 Chevrolet Silverado?
Repair costs can range from $300 to $1,000 depending on whether the NOx sensor needs replacement or if additional wiring or ECM repairs are required.
Can a dirty or clogged NOx sensor trigger the P116B code?
Yes, contaminants or soot buildup on the NOx sensor can cause it to malfunction, potentially triggering the P116B code.
Does the P116B code require immediate attention?
Yes, it’s best to address this code promptly to avoid further damage to the engine or emissions system and to ensure optimal performance.
Discuss the causes and fixes for P116B 2017 Chevrolet Silverado OBDII Code
Code P116B 2017 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.