P116B 2015 GMC Sierra Code - O2 Signal Circuit Low Voltage (NOx Sensor 1)
Quick Answer
The P116B diagnostic trouble code (DTC) for a 2015 GMC Sierra indicates an issue with the O2 signal circuit low voltage related to the NOx (nitrogen oxide) sensor 1. Common causes include Faulty NOx sensor, Damaged wiring or connectors in the O2 signal circuit, ECM software issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116B 2015 GMC Sierra indicates O2 Signal Circuit Low Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx sensor, Damaged wiring or connectors in the O2 signal circuit, ECM software issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116B 2015 GMC Sierra Description
The P116B diagnostic trouble code (DTC) for a 2015 GMC Sierra indicates an issue with the O2 signal circuit low voltage related to the NOx (nitrogen oxide) sensor 1. The NOx sensor is a crucial component in the vehicle's emissions control system, responsible for monitoring and regulating the levels of nitrogen oxides in the exhaust gases. When the O2 signal circuit detects a low voltage from the NOx sensor 1, it suggests that there may be a problem with the sensor's ability to accurately measure and report the NOx levels to the engine control module (ECM).
Common Causes of P116B 2015 GMC Sierra
- Faulty NOx sensor
- Damaged wiring or connectors in the O2 signal circuit
- ECM software issues
- Exhaust system leaks
- Contaminated sensor elements
Symptoms of P116B 2015 GMC Sierra
- Decreased fuel efficiency
- Engine misfires or hesitation
- Illumination of the check engine light
- Increased emissions output
- Rough idling or stalling
How to Fix P116B 2015 GMC Sierra
- Diagnose the issue using a scan tool to read the DTC and monitor the NOx sensor's data.
- Inspect the wiring and connectors in the O2 signal circuit for any damage or corrosion.
- Test the NOx sensor's functionality and replace it if necessary.
- Clear the DTC and reset the ECM to see if the issue persists.
- Perform a road test to verify that the repair was successful and that the symptoms have been resolved.
Cost to Fix P116B 2015 GMC Sierra
The typical repair costs for addressing a P116B code related to the NOx sensor 1 in a 2015 GMC Sierra can vary depending on the specific cause of the issue. On average, the cost of replacing a NOx sensor can range from $200 to $500, including parts and labor. Additional costs may apply if wiring repairs or ECM reprogramming are needed. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local providers for a more accurate estimate.
Need more information about the P116B 2015 GMC Sierra code?
Need more information on how to fix the P116B 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116B 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P116B 2015 GMC Sierra Code
1. What does the OBDII code P116B mean on a 2015 GMC Sierra?
P116B indicates a low voltage issue in the oxygen (O2) signal circuit of NOx Sensor 1, which monitors nitrogen oxide levels in the exhaust system.
2. What are the common symptoms of code P116B on a 2015 GMC Sierra?
Symptoms may include an illuminated check engine light, reduced fuel efficiency, poor engine performance, or the vehicle entering limp mode.
3. What causes the P116B code to appear on a 2015 GMC Sierra?
Common causes include a faulty NOx sensor, damaged wiring or connectors in the O2 signal circuit, or issues with the engine control module (ECM).
4. Can I drive my 2015 GMC Sierra with the P116B code?
Driving with this code is possible but not recommended, as it can lead to increased emissions, reduced engine performance, and potential damage to other components.
5. How do I diagnose the P116B code on my 2015 GMC Sierra?
Start by inspecting the NOx sensor wiring and connectors for damage or corrosion. Use a scan tool to monitor sensor voltage and compare it to manufacturer specifications.
6. How do I fix the P116B code on my 2015 GMC Sierra?
Repairs may include replacing the NOx sensor, repairing damaged wiring or connectors, or reprogramming/updating the ECM if necessary.
7. How much does it cost to repair the P116B code on a 2015 GMC Sierra?
Replacing a NOx sensor typically costs between $300 and $700, including parts and labor, but exact costs can vary depending on the repair shop and location.
8. Can a dirty exhaust system cause the P116B code on a 2015 GMC Sierra?
Yes, excessive soot or contamination in the exhaust system can affect the performance of the NOx sensor and contribute to this code.
9. Will a faulty NOx sensor affect emissions testing for a 2015 GMC Sierra?
Yes, a malfunctioning NOx sensor can increase emissions and may cause your vehicle to fail emissions testing.
10. Is the P116B code specific to the GMC Sierra?
No, the P116B code can appear on other vehicles with similar NOx sensor setups, but the diagnostic and repair process may vary slightly by make and model.
Discuss the causes and fixes for P116B 2015 GMC Sierra OBDII Code
Code P116B 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.