P116B 2014 GMC Sierra Code - O2 Signal Circuit Low Voltage (NOx Sensor 1)
Quick Answer
The P116B diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the O2 signal circuit low voltage, specifically related to the NOx (nitrogen oxide) sensor 1. Common causes include Faulty NOx sensor, Damaged wiring or connectors in the O2 signal circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116B 2014 GMC Sierra indicates O2 Signal Circuit Low Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx sensor, Damaged wiring or connectors in the O2 signal circuit, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116B 2014 GMC Sierra Description
The P116B diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the O2 signal circuit low voltage, specifically related to the NOx (nitrogen oxide) sensor 1. The NOx sensor is responsible for monitoring the nitrogen oxide levels in the exhaust gases to ensure compliance with emissions regulations. When the O2 signal circuit detects low voltage, it means that the sensor is not providing accurate data to the engine control module (ECM), potentially leading to incorrect fuel mixture adjustments and emissions levels.
Common Causes of P116B 2014 GMC Sierra
- Faulty NOx sensor
- Damaged wiring or connectors in the O2 signal circuit
- ECM malfunction
- Exhaust system leaks
- Contaminated sensor
Symptoms of P116B 2014 GMC Sierra
- Decreased fuel efficiency
- Reduced engine power
- Rough idling or hesitation
- Check Engine Light illuminated
How to Fix P116B 2014 GMC Sierra
- Diagnose the issue using a scan tool to pinpoint the exact cause of the low voltage signal.
- Inspect the NOx sensor, wiring, and connectors for any damage or corrosion.
- Replace the faulty NOx sensor if necessary.
- Repair or replace any damaged wiring or connectors in the O2 signal circuit.
- Clear the DTC and perform a test drive to ensure the issue has been resolved.
Cost to Fix P116B 2014 GMC Sierra
The typical repair costs for addressing a P116B code on a 2014 GMC Sierra can vary depending on the specific cause of the issue. In general, replacing a NOx sensor can cost between $200 and $500, including parts and labor. However, additional costs may apply if there are wiring or ECM issues that need to be addressed. It is advisable to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on the specific diagnosis and repair needed. Keep in mind that labor rates can vary, so it's essential to consider factors such as location, vehicle make and model, and the complexity of the repair when estimating costs.
Need more information about the P116B 2014 GMC Sierra code?
Need more information on how to fix the P116B 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116B 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P116B 2014 GMC Sierra Code
1. What does the OBDII code P116B mean for a 2014 GMC Sierra?
P116B indicates a low voltage issue in the O2 signal circuit of NOx Sensor 1, which monitors nitrogen oxide levels in the exhaust.
2. What are the common symptoms of code P116B on a 2014 GMC Sierra?
Symptoms may include the check engine light turning on, reduced fuel efficiency, poor engine performance, and possibly the vehicle entering limp mode.
3. What causes the P116B code to appear on a 2014 GMC Sierra?
Common causes include a faulty NOx sensor, damaged wiring or connectors, a malfunctioning ECM, or excessive soot buildup on the sensor.
4. Can I drive my 2014 GMC Sierra with a P116B code?
It is possible to drive the vehicle, but it is not recommended as it may lead to reduced performance, higher emissions, or further damage to the emissions system.
5. How do I diagnose the P116B code on a 2014 GMC Sierra?
Start by inspecting the NOx sensor wiring and connectors for damage or corrosion, then use a scan tool to monitor live data and confirm low voltage readings from the sensor.
6. How do I fix the P116B code on a 2014 GMC Sierra?
Repairs may include replacing the NOx sensor, repairing damaged wiring or connectors, cleaning soot buildup, or reprogramming the ECM if necessary.
7. How much does it cost to fix a P116B code on a 2014 GMC Sierra?
The repair cost can range from $300 to $800 or more, depending on whether the NOx sensor needs replacement or if additional wiring repairs are required.
8. What tools are needed to repair the P116B code on a 2014 GMC Sierra?
You’ll need an OBDII scanner, basic hand tools, a multimeter for electrical diagnostics, and possibly a replacement NOx sensor.
9. Can a dirty exhaust system cause the P116B code on a 2014 GMC Sierra?
Yes, excessive soot or carbon buildup on the NOx sensor can cause low voltage readings and trigger the P116B code.
10. Will clearing the P116B code solve the issue on my 2014 GMC Sierra?
Clearing the code may temporarily turn off the check engine light, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P116B 2014 GMC Sierra OBDII Code
Code P116B 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.